Specifications - Makita BTD132 Instruction Manual

ENGLISH

SPECIFICATIONS

Capacities
-1
No load speed (min
Impacts per minute
Net weight (with battery cartridge)
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-2:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Model
Machine screw
Standard bolt
High tensile bolt
Hammer mode (High)
)
Hammer mode (Middle)
Hammer mode (Low)
Hammer mode (High)
Hammer mode (Middle)
Hammer mode (Low)
Overall length
Rated voltage
equipment and
environmentally compatible
) : 92 dB(A)
pA
) : 103 dB(A)
WA
END004-2
Vibration
The vibration
determined according to EN60745-2-2:
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
Uncertainty (K) : 2.5 m/s
EC-DECLARATION OF CONFORMITY
Model; BTD132
We declare under our sole responsibility that this
its
product is in compliance with the following standards of
standardized documents;
EN60745,
Directives, 2004/108/EC, 98/37/EC.
ENE033-1
000230
Responsible Manufacturer:
ENG102-1
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
2
BTD132
4 mm - 8 mm
5 mm - 14 mm
5 mm - 12 mm
0 - 2,400
0 - 1,800
0 - 1,100
0 - 3,200
0 - 2,600
0 - 1,100
With one-touch bit holder 139 mm
Without one-touch bit holder 140 mm
1.3 kg
D.C.14.4 V
total value (tri-axial
) : 12.0 m/s
h
2
EN55014 in accordance
CE2008
Tomoyasu Kato
Director
ENG205-1
vector sum)
2
ENH102-8
with Council