Maintenance - Moulinex CG2 User Manual

6
- Place the Duo stand (I and J) on the hot-
plate.
7
- Place the two cups (or one large cup) on the
stand underneath the coffee spouts.
- Set the selector (H) to
filter holder are closed) and press the switch
(F).
8
- When the water tank is empty, set the
selector (H) to
the cups.
- Once the cups are full, reset the selector (H)
to to stop the flow.
. F
OR PROGRAMMABLE MODELS
. Your programmable coffe-maker has
many benefits:
. «time» function,
. setting the timer of the machine up to 24
hours in advance,
. automatic stop after 2 hours on the 'keep
warm' function.
- Plug the appliance in: the display flashes
«--:--».
. Setting the clock:
- Press «sel.» button (L) once. The display
will flash.
- Press button «h» (M) to set the hours.
- Press button «min» (N) to set the minutes.
- Confirm the setting by pressing «sel» button
(L) twice.
. Using in manual mode:
- Press button «0/I» (N). The indicator light
will light and the
tant to show that the machine is working.
- Press button «0/I» (N) to stop the machine.
. Using the appliance in programme mode:
- Press «sel» button (L) twice. The display and
symbol will flash, alternating with the
«Prog» message.
- Press «h» button (M) to set the hour.
- Press «min» button (N) to set the minutes.
- Press «sel.» button (L) once to confirm
programmed time and come back to clock
mode.
- Press «auto» button (M) to start automatic
function off: the
Your coffe-maker is programmed.
At the set time, the indicator light (K) will come
on and the symbol remains constant to
show that the machine is in use.
- Press button «0/I» (N) to stop the machine.
Note: When setting the clock or programme
time, any stops in the setting process for more
than 30 seconds with the «sel.», «h» or «min»
buttons will send the machine back to «clock»
mode.
(the holes of the
to let the coffee flow into
symbol remains cons-
symbol will flash.

Maintenance

. Removing scale (after every 40 uses)
To remove the scale from your appliance, you
can use:
. a sachet of anti-scale solution, diluted in 2
large cups of water, or
. 2 large cups of white alcohol vinegar.
- Pour the mixture into the water tank and
switch the machine on (without coffee
grounds).
. For the models with flavour strength selector:
selector (G) in
. For Duo models : selector (H) in
tion.
- Let the equivalent of one glassful flow into
the coffee pot then stop.
- Leave the solution in the machine for 1 hour
to take effect.
- Switch the machine on once more to let the
rest of the solution flow through.
- Before using again, operate the appliance 2
or 3 times with clean water, without drinking
it (full reservoir).
Attention: Keep anti-scale solution out of
reach of children.
Our guarantee excludes coffee-makers
which fail to operate due to the absence of
de-scaling.
Cleaning
- Unplug the machine.
- Never immerse the machine in water or
under running water.
- The coffee pot (D) and the Duo stand (I and
J) are dishwasher proof.
- To remove used coffee grounds, remove the
9
filter holder from the machine.
- The filter-holder and the filter support may
10
be dismantled to be cleaned more
thoroughly, they are both dishwasher proof.
Accessories
. Replacement coffee pot : ABC9 (ACG2,
ACG3, ACG4, ACG5 models)
. Replacement coffee pot : A15B0G (yellow),
A15B0H (blue), (BCD2, BCD3 models)
10
position.
posi-