Turning Off The Power - Panasonic PT-LM1E Operating Instructions Manual

Turning off the power

#
POWER
INPUT
VIDEO RGB
AUTO
MENU
SETUP
ENTER
$
FREEZE SHUTTER
STD
VOLUME D.ZOOM
INDEX
WINDOW
PROJECTOR
Press the POWER button.
#
B"POWER OFF" is displayed on the
screen.
$ Press the I I or H H button to select "OK", and
then press the ENTER button.
BThe lamp unit will switch off and the picture will stop being projected.
(The power indicator on the projector will illuminate orange while the
cooling fan is still operating.)
%
Disconnect the mains lead after the power
indicator on the projector illuminates red.
NOTE:
B You can also turn off the power by pressing the POWER button twice or
by holding it down for at least 0.5 seconds.
B When the projector is in standby mode (the power indicator on the
projector is illuminated red), the projector continues to draw approximately
5 W of power even when the cooling fan has stopped.
24-E
NGLISH
Power indicator
Mains
%
lead
P O W E R O F F
O K C A N C E L
Direct power off function
You can disconnect the mains lead during projection or immediately after
use and move the projector. The cooling fan will operate by the internal
power supply to cool down the lamp.
B When this function is used, it may take more time for the lamp to turn back
on again compared to when the lamp cools down with the mains lead
connected.
B Do not put the projector in a bag while the cooling fan is operating.
CAUTION
If not using the projector for an extended period of time, disconnect the
mains plug from the mains socket.
B If dust builds up on the mains plug, the resulting humidity may damage the
insulation, which could result in fire.
B This projector continues to draw approximately 5 W of power even when
the power is turned off.
Power indicator
Power indicator status
The projector is in standby mode and image projection
Red Illuminated
is possible by pressing the POWER button.
The projector is preparing for projection after the
power is turned on while the power indicator is
Flashing
illuminated red. (After a short period, a picture will be
Green
projected.)
Illuminated A picture is being projected.
The lamp is cooling down after the power is turned
Illuminated
off. (The cooling fan is operating.)
The projector is preparing for projection after the
Orange
power is turned on while the power indicator is
Flashing
illuminated orange. (After a short period, a picture
will be projected.)
Projector status
E -25
NGLISH