Erasing Caller List Information - Panasonic KX-TSC10FXW Operating Instructions Manual

Using the Caller List
• If the display shows "MEMORY IS FULL" in step 4, press [FUNCTION/EXIT] to
exit the list. To erase other stored items from the Speed Dial List, see page 24.
• To cancel during programming, press [FUNCTION/EXIT]. Start again from step 1.
• You cannot store caller information in the Speed Dial List if a phone number is not
displayed.

Erasing Caller List Information

After checking the Caller List, you can erase some or all of the entries.
Make sure that the handset is on the cradle.
To erase a specific caller from the Caller List
1
Press [ ] or [ ] to enter the Caller List.
2
Scroll to the caller you want to erase
by pressing [ ] or [ ].
3
Press [CLEAR].
• The information is erased.
• After a few seconds, the display will show
the previous caller information.
• To exit the Caller List, press
[FUNCTION/EXIT] or wait for
60 seconds.
To erase all entries in the Caller List
1
Press [CLEAR].
2
Press [ENTER] or [CLEAR].
• All entries are erased.
• The unit will exit the Caller List.
18
JACK SMITH
AM
10:50 23/11
CLEAR
ALL CLEAR ?
ALL CLEAR
NO ITEMS STORED
12:34 24/11
PM