Storing Caller List Information In The Speed Dial List - Panasonic KX-TSC10FXW Operating Instructions Manual

Storing Caller List Information in the Speed Dial List

You can store numbers in the Caller List to the Speed Dial list.
Make sure that the handset is on the cradle.
1
Press [ ] or [ ] to enter the Caller List.
2
Scroll to the caller you want to store by
pressing [ ] or [ ].
3
Press [ ] or [ENTER].
• If the number requires editing, see
page 16.
4
Press [ENTER].
If there is no name information for
the caller, "ENTER NAME" will be
displayed.
a) If a name is required, enter the
name (p. 21). When finished, press [
b) If a name is not required, press [
If there is name information, "ENTER
LIST#" will be shown.
• The empty memory station number is
selected automatically.
(Ex. The empty number is "12".)
• You can select the other memory station
number (01 to 50) using the dialing
buttons, or pressing [ ] or [ ].
5
Press [ENTER].
If the memory station number
selected manually is occupied, the
display on the right will be shown.
To overwrite, press [ENTER].
To select other empty memory station
number, press [ ], enter an empty
memory station number using the
dialing buttons, or pressing [ ] or [ ],
then press [ENTER].
• After a few seconds, the display will return to the Caller List. You can
continue storing other items. To exit the Caller List, press
[FUNCTION/EXIT] or wait for 60 seconds.
1234567890
AM
10:50 23/11
1234567890
ENTER NAME
].
ENTER
].
ENTER
ENTER LIST#
STORED
OVERWRITE ?
/
x4
NEW
/
#
12
#
11
(Continued )
17