Panasonic KXTG2512E Operating Instructions Manual page 39

TG251x_2xE(e).book Page 39 Monday, January 25, 2010 3:09 PM
Problem
Caller information is slow to
display.
The name stored in the
phonebook is not fully
displayed while an outside call
is being received.
Answering system (KX-TG2521/KX-TG2522/KX-TG2523/KX-TG2524)
Problem Cause/solution
The unit does not L The answering system is turned off. Turn it on (page 25).
record new
L The message memory is full. Erase unnecessary
messages.
messages (page 27).
L The recording time is set to "Greeting Only". Change
the setting (page 30).
L If your own greeting message is not recorded properly,
callers are unable to leave a message. Record your own
greeting message again (page 26).
L If you subscribe to a voice mail service, messages are
recorded by your service provider/telephone company,
not your telephone. Change the unit's number of rings
setting or contact your service provider/telephone
company (page 29).
My own greeting L Record your own greeting message again (page 26).
message cannot be
properly heard.
I cannot operate the L Someone is using the unit. Wait for the other user to
answering system. finish.
L A caller is leaving a message. Wait for the caller to finish.
L The handset is too far from the base unit. Move closer.
I cannot operate the L The remote access code is not set. Set the remote
answering system access code (page 28).
remotely.
L You are entering the wrong remote access code. If you
have forgotten your remote access code, enter the
remote access code setting to check your current code
(page 28).
L Press each key firmly.
L The answering system is turned off. Turn it on (page 29).
*1 KX-TG2522/KX-TG2523/KX-TG2524
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Cause/solution
L Depending on your service provider/
telephone company, the unit may display the
caller's information at the 2nd ring or later.
L Move closer to the base unit.
L Edit the phonebook entry name to fit in 1 line
of text (page 18).
*1
Useful Information
39