Sms (Short Message Service); Using Sms; Turning Sms On/Off; Storing Sms Message Centre Numbers - Panasonic KX-TG8151FX Operating Instructions Manual

Using SMS

SMS allows you to send and receive text
messages between other fixed-line and mobile
phones that support compatible SMS
networks and features.
Important:
R To use SMS features, you must:
– subscribe to a Caller ID and/or an
appropriate service such as SMS.
– confirm that SMS is turned on.
– confirm that the correct message centre
numbers are stored.
Contact your service provider/telephone
company for details and availability.
Note:
R A total of 47 messages (at 160 characters/
message) can be saved. Total number may
be more than 47 if length of messages is
less than 160 characters/message.
R If the unit is connected to a PBX system,
you may not be able to use SMS features.

Turning SMS on/off

1
(middle soft key) #357
2
MbN: Select the desired setting. a
a M N
Storing SMS message
centre numbers
SMS message centre numbers must be
stored in order to send and receive SMS
messages.
For Czech:
The message centre numbers (used for SMS
services provided by Telefonica O2) are
preprogrammed in this unit. You can change
them if necessary.
For Slovakia:
The message centre numbers (used for SMS
service provided by Slovak Telecom - T-Com)
are preprogrammed in this unit. You can
change them if necessary.
TG8151_61FX(en)_0323_ver011.pdf

SMS (Short Message Service)

R Contact your service provider/telephone
company for more information.
R If you change the unit's region setting/reset
the base unit, the stored message centre
numbers will be deleted or changed
(page 26). In this case, store the numbers
again if necessary.
1
To store "Message Centre1":
To store "Message Centre2":
2
Edit the number as necessary. a
a M
Note:
R For PBX users:
– You need to add the PBX line access
– If you only use the Message Centre 1

Sending a message

Writing and sending a new
message
1
2
MbN: "Create" a
R If "DUse Last Text?" is displayed,
3
Enter a message. a
R You can change the character entry
4
Enter the destination phone number (20
digits max.). a
To use the redial list:
MEN (T) a MbN: Select the phone
number. a
To use the caller list:
39
(middle soft key) #351
(middle soft key) #352
N
number and a dialling pause to the
beginning of the Message Centre 1
number.
number for SMS, store the Message
Centre 1 number as is (without adding a
line access number or dialling pause) to
Message Centre 2.
(middle soft key) a
you can use the text from the last
message you created by pressing MDN.
mode by pressing (page 49).
2 times
2012/03/23 16:35:22
a
39