Special Programming - Panasonic KX-TG8151FX Operating Instructions Manual

*8 If you do not want the unit to ring before the caller information is received, set to "Off".
(Caller ID subscribers only)
You can only remove the first ring if the unit rings two times or more by default, which
depends on your service provider/telephone company.
*9 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select "Caller ID". To turn this feature off, select "Manual".
(Caller ID subscribers only)
To use this feature, set the date and time first (page 15).
*10 You can set the wallpaper to display with or without date and time by pressing
default setting is with date and time displayed.
*11 You can set the handset display backlight while on charge.
– "On": Backlight is on (dimmed).
– "Off": Backlight turns off after 10 seconds of charging.
*12 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*13 If you subscribe to a Caller ID service and want to view the caller's information after lifting up
the handset to answer a call, turn off this feature.
*14 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*15 The default setting will be as follows if you select the following regional codes when
changing the unit's region setting (page 34):
"Česká rep." = "100 msec."
"Slovensko" = "100 msec."
*16 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*17 KX-TG8151 series: page 3

Special programming

Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 5 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Set the date and time beforehand
(page 15).
1
(middle soft key) #720
2
Select an alarm by pressing 1 to 5. a
TG8151_61FX(en)_0323_ver011.pdf
3
MbN: Select the desired alarm option. a
4
Proceed with the operation according to
your selection in step 3.
n Once:
31
Programming
"Off"
Turns alarm off. Go to step 9.
"Once"
An alarm sounds once at the set time.
"Daily"
An alarm sounds daily at the set time.
Go to step 5.
"Weekly"
Alarm sounds weekly at the set time(s).
Enter the desired date and month. a
2012/03/23 16:35:21
. The
31