Panasonic UF-6300 Operating Instructions Manual page 37

No. Parameter
18 OP CALL TIMER
19 OGM LENGTH
(TAM I/F)
20 SILENT DETECTION
(TAM I/F)
22 SUBSTITUTE RCV
23 REC. PAPER SIZE
24 PRINT REDUCTION
25 REDUCTION RATIO
26 POLLING PASSWORD
27 POLLED FILE SAVE
28 STAMP AT MEMORY
XMT
30 DRD
31 INC. FILE SAVE
32 COPY REDUCTION
Setting
Setting
Number
1 20SEC Selecting the length of time that your machine signals
(rings) for an incoming voice call in Fax/Tel Auto Switching
2 30SEC
mode. (See page 68)
3 40SEC
4 50SEC
1 1SEC Setting for the OGM length of your TAM from 1 to 60
seconds. The machine will not start to detect SILENCE
--- ---
until the time setting has lapsed.
60 60SEC
(Default = 20 sec.)
1 INVALID Selecting the Silent Detection Mode.
2 VALID
1 INVALID Selecting whether the machine receives to memory when
recording paper runs out, toner runs out or recording paper
2 VALID
is jammed.
1 A4 Setting the recording paper size installed in your machine.
2 LETTER
3 LEGAL
1 FIXED Selecting print reduction mode.
FIXED : Reduce received document according to setting of
2 AUTO
AUTO : Reduce received document according to the
70 70% Selecting fixed print reduction ratio from 70% to 100%.
This parameter functions only when fixed print reduction is
---- ----
selected on Fax Parameter No. 24.
100 100%
(----) Setting a 4-digit password for secured polling.
1 INVALID Selecting whether the machine retains the polled
document in memory even after the document is polled
2 VALID
once.
1 INVALID Selecting whether the machine stamps the original
documents when storing the documents into memory.
2 VALID
(Depending on the Stamp setting on the Control Panel)
1 INVALID Selecting whether or not the machine is available "DRD
Service". If this parameter is set to "VALID", your machine
2 VALID
detects the specified ring pattern only to receive a
document automatically.
1 INVALID Selecting whether the machine retains the document in
memory if the document is not successfully transmitted.
2 VALID
1 MANUAL Selecting whether the machine performs the copy
reduction ratio automatically or manually.
2 AUTO
MANUAL: The machine will prompt you for the Zoom ratio
AUTO
Customizing Your Machine
Comments
Parameter No. 25.
length of received documents.
(100% to 70%) when making copies.
: The machine will automatically determine the
reduction ratio according to the length of the
original document.
Continued on the next page...
37