Network Easy Settings - Panasonic Diga DMR-XW380 Operating Instructions Manual

Network Easy Settings

After completing "Easy setting", you can continue with
"Network Easy Settings".
Follow the on-screen instructions and make
the following settings.
≥Network connection test
≥Home Network (DLNA) function setting
≥Internet connection test
Network Easy Settings
LAN setup and testing of home network and
internet connections are required for internet
functions. Broadband Internet connection is
necessary for network features.
Please confirm that a LAN cable is connected.
Please refer to the operating instructions.
Press OK to start Network Easy Settings.
OK
RETURN
When TV picture appears, Setup is complete.
∫ When you experience problems with
settings
≥Network Easy Settings ( Connection Test )
Display
1. LAN cable
"Fail"
connection:
2. IP address
"Fail"
setting:
3. Connection to
"Fail"
gateway:
1. LAN cable
"Pass"
connection:
2. IP address "Fail" or
setting: "Home
network
available"
3. Connection to
"Fail"
gateway:
1. LAN cable
"Pass"
connection:
2. IP address
"Pass"
setting:
3. Connection to
"Fail"
gateway:
≥Network Easy Settings ( Internet Connection
Cannot find the
server. (B019)
No connection
could be made to
the server. (B020)
To stop partway
Press [BACK/RETURN
To restart Network Easy Settings
1 While stopped
Press [FUNCTION MENU].
2 Select "Others", then press [OK].
3 Select "Setup", then press [OK].
4 Select "Network Easy Settings" in "Network", then
Check the
press [OK].
following
To redo settings individually
≥Connection of
1 While stopped
the LAN
Press [FUNCTION MENU].
cables ( 10)
2 Select "Others", then press [OK].
3 Select "Setup", then press [OK].
4 Select "Network Settings" in "Network", then press
[OK].
≥Connection
5 Select "IP Address / DNS Settings" (
and settings of
"Proxy Server Settings" (
the hub and
router
Check security before using Home Network
≥Settings of "IP
(DLNA) function
Address / DNS
If you set "Home Network (DLNA) function" to "On",
Settings"
all connected devices on the same network can
( 84)
access this unit. Ensure that the router for your home
network has adequate security system to prevent
unauthorized access.
≥Refer to the operating instructions of the hub or
router.
≥ Home Network (DLNA) function setting can not be set
when "Power Save in Standby" mode is activated.
≥ If you set "Home Network (DLNA) function" to "Off", it is
possible to set to "On" later (
Test )
Display Check the following
≥Network connections and
settings
≥Settings of "IP Address /
DNS Settings" (
≥The server may be busy or
the service may have been
suspended. Please wait a
few moments, and then try
again.
≥Settings of "Proxy Server
Settings" (
].
84)
84)
84) or
84), then press [OK].
67).
VQT2J58
13