Network Easy Settings - Panasonic DMR-XW480 Operating Instructions Manual

Network Easy Settings

After completing "Easy setting", you can continue to perform
"Network Easy Settings".
Follow the on-screen instructions and make
the settings.
Network Easy Settings
LAN setup and testing of home network and
internet connections are required for internet
functions. Broadband Internet connection is
necessary for network features.
Please confirm that a LAN cable is connected.
Please refer to the operating instructions.
Press OK to start Network Easy Settings.
OK
RETURN
∫ When you experience problems with
settings
≥Network Easy Settings ( Connection Test )
Display
1. LAN cable
"Fail"
connection:
2. IP address
"Fail"
setting:
3. Connection to
"Fail"
gateway:
1. LAN cable
"Pass"
connection:
2. IP address "Fail" or "Home
setting: network
available"
3. Connection to
"Fail"
gateway:
1. LAN cable
"Pass"
connection:
2. IP address
"Pass"
setting:
3. Connection to
"Fail"
gateway:
≥Network Easy Settings ( Internet Connection Test )
Cannot find the
server. (B019)
No connection could
be made to the
server. (B020)
When television picture appears, set up is complete.
To stop partway
Press [RETURN
To restart Network Easy Settings
1 While stopped
Press [SETUP].
Check the
2 Select "Network Easy Settings" in "Network", then press
following
[OK].
≥Connection of
the LAN cables
To redo settings individually
( 13)
1 While stopped
Press [SETUP].
2 Select "Network Settings" in "Network", then press [OK].
3 Select "IP Address / DNS Settings" (
Server Settings" (
≥Connection and
settings of the
hub and router
≥Settings of "IP
Address / DNS
≥ Refer to the operating instructions of the hub or router.
Settings" ( 81)
Display Check the following
≥Network connections and
settings
≥Settings of "IP Address / DNS
Settings" (
≥The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
≥Settings of "Proxy Server
Settings" (
].
81), then press [OK].
81)
81)
81) or "Proxy
19
VQT2J62