Panasonic Diga DMR-XW380 Operating Instructions Manual page 67

When "DLNA Function" is deactivated
make the following settings.
1 While stopped
Press [FUNCTION MENU].
2 Select "Others", then press [OK].
3 Select "Setup", then press [OK].
4 Select "Network", then press [OK].
5 Select "Network Settings", then press [OK].
6 Select "Home Network ( DLNA ) Settings", then
press [OK].
Home Network (DLNA) Settings
Home Network (DLNA) function
Setting device name
Registration type for remote devices
Named devices
Unnamed devices
OK
RETURN
7 Select "Home Network ( DLNA ) function", then
press [OK].
8 Select "On", then press [OK].
≥"Power Save in Standby" in the Setup is set to
"Off". ( 84)
9 Select "Registration type for remote devices", then
press [OK].
: Select "Automatic" or "Manual", then press [OK].
Automatic All connected devices on the
same network can access this
unit.
4 Panasonic DLNA compatible
equipment and 12 Non-
Panasonic DLNA compatible
equipment will be automatically
registered.
≥Equipment registered earliest
will be deregistered when the
5th Panasonic DLNA compatible
equipment or 13th Non-
Panasonic DLNA compatible
equipment is connected to this
unit.
≥Ensure that the router for your
home network has adequate
security system to prevent
unauthorized access.
Manual Select the devices to register.
( right, To register equipment
manually)
To register equipment manually
After selecting
1 Select "Named devices" or "Unnamed devices",
On
Automatic
2 Named devices
3 Select "Yes", then press [OK].
4 Access this unit from the connected DLNA
To deregister equipment
After selecting
1 Select "Named devices" or "Unnamed devices",
2 Select the equipment, then press [OK].
3 Select
To set the name of this unit for displaying on the
connected equipment
After performing step 8 (
1 Select "Setting device name", then press [OK].
2 Select "Select from a preset list" or "Create name",
3 Select from a preset list
4 Create name
" "
Manual in step : (
then press [OK].
Named Four Panasonic DLNA
devices compatible equipment can be
registered.
≥Even if it is Panasonic
equipment, you may not be able
to register from "Named
devices". In this case select
"Unnamed devices".
Unnamed 12 non-Panasonic DLNA
devices compatible equipment can be
registered.
Select "Add new device" then press [OK].
Unnamed devices
Select the MAC Address for the connected
equipment, then press [OK].
compatible equipment within 10 minutes.
" "
Manual in step : (
then press [OK].
" ".
Yes
then press [OK].
Select the preset name, then press [OK].
Enter the name. ( 74, Entering text)
left)
left)
left)
VQT2J58
67