Easy Setting; Easy Network Setting - Panasonic DMR-XW440 Operating Instructions Manual

Easy Setting

1
Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
2
Press [Í] on the remote control or [Í/I] on
this unit.
• The Easy Setting will start at the initial power on.
3
Follow the on-screen instructions and
perform the settings.
• When the Download from TV screen appears, the
setting information on the TV is acquired by this unit.
( 67)
Auto Setup starts.
(This operation may take some time.)
e.g.,
Digital TV Auto Tuning
Progress
This will take about 3 minutes.
RF Ch Channel Name
35
35
Digital TV: 2 Radio: 0
Searching
4
Clock will be set automatically.
If the clock setting screen appears, set the
time manually (
5
Set "Quick Start" to "On", "Off" or "Timer
Setting for Quick Start", then press [OK].
For details, refer to "Quick Start". (
6
If the TV aspect setting screen appeares:
Select the item to match the type of TV
connected.
For details, refer to "TV Aspect". (
When "Easy Setting has been completed."
appears, Easy Setting is complete.
• Select "Yes" to set network settings.
• Select "No" to finish the Easy Setting.
To stop partway
Press [RETURN ].
To restart setup
1 Press [SETUP]. (
2 Select "Auto Setup" in "Digital TV Tuning",
then press [OK].
3 Select "Yes", then press [OK].
CH 21 69
Type Quality
Digital TV 10
10
Digital TV
80, Clock).
79)
76)
18)
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.

Easy Network Setting

1
Follow the on-screen instructions and make
the following confirmation and settings.
- Home Network Connection Check
- Home Network function
- Remote Recording function
- Internet Connection Test
2
When "Easy Network Setting is finished."
appears
Press [OK].
To restart Easy Network Setting
1 Press [SETUP]. (
2 Select "Easy Network Setting" in "Network",
then press [OK].
To redo settings individually
If "Easy Network Setting" did not work properly or
when you change the settings individually,
perform the following steps:
1 Press [SETUP]. (
2 Select "Network Settings" in "Network", then
press [OK].
3 Refer to "Network Settings". (
Check security before using Home Network
function
If you set "Home Network function" to "On", all
connected devices on the same network can
access this unit. Ensure that the router for your
home network has adequate security system to
prevent unauthorized access.
• Refer to the operating instructions of the hub or router.
• If you set "Home Network function" or "Remote Recording
function" to "On", the setting for "Quick Start" is fixed to
"On".
• Please be aware that connecting to a network without
encryption may result in the content of the communication
being illegitimately viewed by a third party, or the leaking of
data such as personal or secret information.
Getting started
18)
18)
77)
SQT0135
19