Table of Contents
Advertisement
7. Programmable Features
Feature
Sending a fax at a
specified time
Setting the Caller ID list
to print automatically
Setting the quick scan
44
Feature code
Selection
This feature allows you to take advantage of low-cost calling
{#}{2}{5}
hours offered by your telephone company. This feature can be set
up to 24 hours in advance of the desired time.
{0} "OFF" (default)
{1} "ON"
To send a document:
1. Insert the document.
2. If necessary, press {A} or {B} repeatedly to select the
desired resolution (page 27).
3. {MENU} i {#}{2}{5}
4. Press {1} to select "ON". i {SET}
5. Enter the fax number. i {SET}
6. Enter the transmission start time.
7. {SET} i {MENU}
Note:
L To cancel after programming, press {STOP} then {SET}.
{0} "OFF" (default): The Caller ID list will not be printed
{#}{2}{6}
automatically, but the base unit will keep a record of the
information for the last 50 callers.
{1} "ON": The Caller ID list will be printed automatically each time
the base unit logs 50 callers (page 23).
This feature is helpful when you want to remove the document for
{#}{3}{4}
other uses, because the unit will release the document before
sending or copying.
{0} "OFF" (default): Deactivates this feature.
{1} "ON": The unit will scan the document and store it into
memory first, then the unit will start sending or copying the
documents.
Note:
L If the document exceeds the memory capacity, sending of the
whole document or copying of the exceeded document will be
cancelled and this feature will be turned OFF automatically.
L If you select 12-hour time entry (page 17), press {*}
repeatedly to select AM or PM.
L If you select 24-hour time entry (page 17), the time is set
using 24-hour time entry.
Advertisement
Table of Contents
