Receiving A Message - Panasonic KX-TG6711FX Operating Instructions Manual

SMS (Short Message Service)
remaining information, press MEN. To
return to the previous screen, press
MFN.
To use the phonebook:
a MbN: Select the phonebook
entry. a 2 times
5
To save the message, select "Yes". a
6
To send the message, press
R To cancel sending, press M
Note:
R This unit supports SMS messages of up to
612 characters, however, the maximum
number of characters you can send or
receive may be limited by your SMS service
provider/telephone company. Contact your
SMS service provider/telephone company
for details.
R If your message contains over 160
characters, the message is a long message
and "IILong TextII" is displayed. Your
service provider/telephone company may
treat long messages differently from other
messages. Contact your service provider/
telephone company for details.
R If your phone is connected to a PBX, store
the PBX line access number (page 35).
Editing/sending a saved message
1
a a
2
MbN: "Send List" a
3
To read a saved message, press MCN or
MDN to select the message. a
4
To edit the message:
a MbN: "Edit Message" a
a Continue from step 3, "Writing and
sending a new message", page 33.
To send the message:
a MbN: "Send" a
and hold to erase all numbers. a
Continue from step 4, "Writing and
sending a new message", page 33.
34
TG6711_51FX(en)_0803_ver101.pdf
Erasing saved messages
1
2
MbN: "Send List" a
3
MbN: Select a message. a
4
R To erase all messages, select "Erase
.
5
MbN: "Yes" a
N.

Receiving a message

When an SMS message is received:
– "Receiving SMS Message" is displayed.
– a tone is heard (if the handset ringer is
turned on).
–
new (unread) SMS messages.
Reading a received message
1
2
MbN: "Receive List" a
3
MbN: Select a message.
R Messages which have already been
R To erase a message, press
4
Press
Note:
R To call the message sender, press M
Using the smart function key
When the
function indicator flashes slowly, there are new
a Press
SMS messages.
Press MSmart functionN in step 1 on "Reading
a received message", page 34.
R "New SMS" must be set to "On" in Top key
setup (page 14).
R When the unit has new SMS messages
and missed calls, the unit can be operated
34
a a
a MbN: "Erase" a
All". a
a M
is displayed with the total number of
a a
read are indicated by a " ", even if
they were read using another handset.
MbN: "Yes" a
to read the message content.
is displayed and the smart
2012/08/03 11:58:57
N
. a
N.