Programming
Programmable settings
You can customise the unit by programming the following features using the handset.
To access the features, there are 2 methods.
n Scrolling through the display menus
1
2
Press MCN, MDN, MEN, or MFN to select the desired main menu. a
3
Press MCN or MDN to select the desired item from the next sub-menus. a
4
Press MCN or MDN to select the desired setting. a
R This step may vary depending on the feature being programmed.
R To exit the operation, press M
n Using the direct command code
1
a Enter the desired code.
Example: Press
2
Select the desired setting. a
R This step may vary depending on the feature being programmed.
R To exit the operation, press M
Note:
R In the following table, < > indicates the default settings.
R In the following table,
R Display menu order and sub-menu may vary depending on your model.
Display the menu tree and direct command code table
Main menu:
"Caller List"
Operation
Viewing the caller list.
Main menu:
"Time Settings"
Sub-menu 1
*1
Set Date/Time
Memo Alarm
*1, *2
Time Adjustment
22
TG6711_51FX(en)_0803_ver101.pdf
N.
#101.
N.
indicates the reference page number.
Sub-menu 2
–
1–3: Alarm1-3
–
22
Code
#213
Settings
Code
–
#101
1: Once
#720
2: Daily
3: Weekly
0: <Off>
1: Caller ID
#226
0: <Manual>
2012/08/03
11:58:56
31
13
26
–