Receiving A Message - Panasonic KX-TG8611PD Operating Instructions Manual

Digital cordless phone with tft colour display
Table of Contents

Advertisement

TG8611PD(e-hg).book Page 38 Friday, March 18, 2011 1:31 PM
SMS (Short Message Service)
Megjegyzés:
L This unit supports SMS messages of up to
612 characters, however, the maximum
number of characters you can send or
receive may be limited by your SMS
service provider/telephone company.
Contact your SMS service
provider/telephone company for details.
L If your message contains over 160
characters, the message is a long
message and "@Hosszú üz.@" is
displayed. Your service provider/
telephone company may treat long
messages differently from other
messages. Contact your service
provider/telephone company for details.
L If your phone is connected to a PBX, store
the PBX line access number (39. oldal).
Editing/sending a saved
message
1
1 (middle soft key) s e s M
2
{r}: "Küldött lista" s M
3
To read a saved message, press {V} or
{^} to select the message. s M
4
To edit the message:
1 s {r}: "Üzenet
szerkesztése" s M s Continue
from step 3, „Writing and sending a new
message", 37. oldal.
To send the message:
1 s {r}: "Küldés" s M s
Press and hold ^ to erase all
numbers. s Continue from step 4,
„Writing and sending a new message",
37. oldal.
Erasing saved messages
1
1 (middle soft key) s e s M
2
{r}: "Küldött lista" s M
3
{r}: Select a message. s M
4
1 s {r}: "Törlés" s M
L To erase all messages, select
"Mindent töröl". s M
5
{r}: "IGEN" s M s {ic}
38

Receiving a message

When an SMS message is received:
– "Fogadás SMS-üzenet" is displayed.
– a tone is heard (if the handset ringer is
turned on).
– e is displayed with the total number of
new (unread) SMS messages.
Reading a received message
1
1 (middle soft key) s e s M
2
{r}: "Fogadott lista" s M
3
{r}: Select a message.
L Messages which have already been
read are indicated by a "Q", even if
they were read using another
handset.
L To erase a message, press W. s
{r}: "IGEN" s M
4
Press M to read the message content.
Megjegyzés:
L To call the message sender, press {C}.
Replying to a message
1
While reading a received message,
press 1.
2
{r}: "Válasz" s M
3
Enter a message (45. oldal). s M
4
Edit the destination phone number if
necessary. s M
5
Continue from step 5, „Writing and
sending a new message", 37. oldal.
Editing/forwarding a message
1
While reading a received message,
press 1.
2
{r}: "Üzenet szerkesztése" s
M
3
Continue from step 3, „Writing and
sending a new message", 37. oldal.
Erasing received messages
1
While reading a received message,
press 1.

Advertisement

Table of Contents
loading

Table of Contents