Pyrolysis: Automatic Oven Cleaning - Panasonic HL-BT62S Operating Instructions & Installation Instructions

Cleaning and maintenance
Pyrolysis: automatic oven
cleaning
Pyrolysis is an automatic high-
temperature cleaning procedure which
causes dirt to dissolve. Thanks to this
process, it is possible to clean the
inside of the oven very easily.
„ Notes
During the first automatic cleaning
cycle, unpleasant smells may occur
due to the normal evaporation of oily
manufacturing substances. This is
an absolutely normal phenomenon
which disappears after the first
cleaning cycle.
Before starting the automatic
cleaning cycle, make sure that the
oven does not contain any foods or
large spills from previous cooking
operations.
During the pyrolysis cycle, a door
locking device makes it impossible to
open the door.
WARNING
If the oven is installed underneath a
hob, make sure that the burners or
electric plates remain off during the
automatic cleaning cycle.
During the 'Pyrolytic' cleaning cycle
hot air may be exhausted from the
vent above the door.
Before starting the automatic
cleaning cycle
Pyrolysis may be carried out at any
time of the day or night (if you wish to
benefit from the lower cost of electricity
overnight).
„ Completely remove all accessories
from inside the oven. The roof liner
is not considered an accessory and
must therefore be kept inside the
oven.
„ Remove the guide frames, see
"page 40 EN, Removing guide
frames".
41
EN