On Screen Messages - Panasonic Viera TX-32LXD700 Operating Instructions Manual

On screen messages

Message
All tuning data will be erased
Are you sure ?
Are you sure you want to delete this timer ?
Press OK to delete timer
Press Exit to return
Bad Signal
DOWNLOAD IN PROGRESS PLEASE WAIT
Feature not available
Invalid DVB Channel
Invalid system time. Please exit !
Key not available
Max. number of Timers already set !
New DVB Service Found!
Press OK start Auto Setup
Press EXIT to Ignore.
Selecting Auto Setup will delete
current Profile and Childlock settings
New version 1.90 found.
Do you really want to update the
software and reboot the system ?
Press OK to download the new version
Press EXIT to Ignore
No DVB Service found
No module inserted
No recording - Check Tape or Disc
No recording - UNKNOWN REASON
No Service
No Signal
52
Meaning / Action
•
"Shipping Condition" will erase all tuning data (p. 32).
•
"Auto Setup" will be erased all present DVB and Analogue tuning
datas (p. 30).
•
Make sure the operation is with your desire.
•
Make sure the deleting programme event is with your desire.
•
The signal is weak. Check the aerial.
•
Q-Link channel download is in progress.
•
Check the Q-Link connection and setting (p. 40).
•
The impossible source (Component / HDMI / PC) to be record.
•
Invalid DVB channel is selected.
•
Cannot get the time information. Check the connection of the RF
cable.
•
You cannot select the same input source between Main and Sub
screen when you are viewing in multi window. (p. 13)
•
Maximum timer programming event is 8.
•
There is a new DVB station.
•
There is a new software available.
•
No DVB signal can be found in Auto Setup.
•
Check the CI module inserted completely (p. 27).
•
The tape or disc may be "write protected", missing or damaged.
The equipment may already be recording.
•
The recording cannot be done by any reason. Check the equipment.
•
Disc or tape may be full.
•
The station stops the services.
•
Check the connection of the RF cable.
Message
No stations found
Please insert the aerial
PIN incorrect !
Please check aerial or local
DVB service availability.
Press OK to start Auto Setup
Please check settings and connections on
HDMI devices.
Please wait.
Recording in progress
Shipping condition completed.
TV can now be switched off.
Software successfully updated
Press EXIT to continue
Software Update failed. Please try again later.
Press EXIT to continue
This service is locked !
Press OK to enter PIN
Timer already expired !
Timer Event Due to Start
DVB 1: BBC1 has been
Programmed for recording at 20:00
Timer incorrect !
Timer overlap !
Tuner Locked
Please stop recording to operate
Unable to download, Check Equipment
Meaning / Action
•
No analogue signal can be found in Auto Setup.
•
The PIN number you entered is wrong.
•
Please follow the message.
If it is still failed, consult your local Panasonic dealer.
•
Communication error in VIERA Link function (p. 42).
•
A function is in progress.
•
The recording equipment is recording the programme signal from
its own tuner. You can turn the TV off and leave the equipment
recording in the normal way.
•
"Auto Setup" will automatically start when Mains power On / Off
switch is next turned On. (p. 10)
•
The software updating is finished.
•
Perform "System Update Search Now" in System Update (p. 27).
If it is still failed, there may not be the new software.
•
The selected channel is locked in Child Lock (p. 29).
•
Starting time in Timer Programming is already past. Set correctly
(p. 37).
•
This message will appear 2 minutes before timer programming
event due to start.
•
Set Starting and Ending times in Timer Programming correctly
(p. 37).
•
The timer programme events are overlapped. Cannot record other
channel at the same time. Check the Starting and Ending times in
Timer Programming (p. 37).
•
If you want to unlock, cancel Direct TV Recording (p. 40) or Timer
Programming (p. 36).
•
The tape or disc is active. Stop the equipment and try again.
53