Viewing From Card (Photos) - Panasonic Viera TX-32LXD700 Operating Instructions Manual

Viewing from card
The still images recorded by the digital camera will be displayed.
1
2
INPUT
OPTION SD CARD
EXIT
3
RETURN
Selected
photo
4
Operation
■
To return to guide
thumbnail screen
RETURN
Caution
■ •
To return to TV
During the operation, no signals are output from the monitor output terminals.
•
EXIT
SD CARD "Date" shows the date on which the recording was made by the digital camera.
or
It shows "**/**/****" when recordings are made without date signal.
Cautions in handling SD Card
•
Do not remove the card while the TV is accessing data (this can damage card or TV).
•
Do not touch the pins on the back of the card.
•
Do not subject the card to a high pressure or impact.
•
Insert the card in the correct direction (otherwise, card may be damaged).
•
Electrical interference, static electricity, or erroneous operation may damage the data or card.
•
Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the
38
TV. (Panasonic is not liable for any deterioration or damage of recorded data.)
(Photos)
Insert the SD Card
•
Warning message for output signal is displayed.
Signal output from all AV terminals will
be disabled during SD card view.
Press OK to proceed.
Press EXIT to return to TV viewing.
Enter SD mode (Photo View Mode)
Select the photo to be viewed
Error display
(images that could not be loaded, etc.)
Photo View Mode
1/17
Filename
100-0001 100-0002 100-0003 100-0004
100-0001
Date
■
10/23/2006
Pixel
1600 x 1200
100-0005 100-0006 100-0007 100-0008
Reading
Select
View EXIT
Select
100-0009 100-0010 100-0011 100-0012
MENU RETURN
Slide show
Selected photo (Thumbnail screen)
information is displayed
View
■ OPTION
To display the operation guide or
To previous photo
Rotate 90˚ (anti-clockwise)
To next photo
Single view
Rotate
EXIT
Prev Select Rotate 90˚
MENU List
(clockwise)
Rotate
Slide show
Displayed one at a time
•
SD
Card
■
Start Slide show (operate in step
Select the photo for the first view
select
view
Slide show
■
Slide show settings (operate in step
•
red
Display the
For details,
menu
see p. 39
Menu Item
Interval
Repeat
Is SD Card in?
No valid file to play
Cannot read file
For details on SD Cards (p. 48)
■
To insert
Label surface
Push until a click is heard
Slide show
or )
Start Slide show
red
)
or
Select "Viewing setup"
access
Main Menu
Picture
Viewing Setup select
•
"Picture Menu" (p. 22)
Adjustments / Configurations (alternatives)
Select slide show interval (5 / 10 / 15 / 30 / 60 / 90 / 120 seconds)
Slide show repeat (Off / On)
On screen messages
Message
•
Insert a SD card.
•
The card has no data.
•
The file is broken or unreadable.
•
The TV does not support the format.
(For the applicable formats and data, see p. 48.)
■
To remove
Press the centre of the card
•
To pause
Select the functions and set
set
Viewing Setup
Interval 5 seconds
Repeat Off
select
Meaning / Action
39