Displaying Colored Depth Contours; Displaying Light Sectors; Displaying Sounding Points; Displaying Navigation Aids - Magellan FX324 MAP Manual

Menu CHART Tab
Select the maximum depth for which the depth contours should be
displayed and push Enter. For example, select 10 meters/33 feet to
display depth contours down to 10meters/33 feet depth. Select All to
display all the depth contours.

Displaying Colored Depth Contours

You can choose how the display varies according to depth.
Menu CHART Tab
Select the depth at which the display color should change and push Enter.
For example, select 5 meters/16 feet to change the display color for every
5 meters/16 feet of depth or select None to use the same color for all
depths.
Note: The depths are displayed in grayscale on the FX324 MAP and in
color on the FX324 MAP Color.

Displaying Light Sectors

You can choose whether or not to display the signal light sectors; that is,
whether or not the different lighthouse sectors are visible.
Menu CHART Tab
Select Yes (visible) or No (invisible) and push Enter.

Displaying Sounding Points

You can choose whether or not to display sounding points.
Menu CHART Tab
Select Yes (visible) or No (invisible) and push Enter.

Displaying Navigation Aids

You can choose whether or not to display navigation aids such as,
seamarks, wrecks, buoys and beacons, etc.
Menu CHART Tab
Select Yes (visible) or No (invisible) and push Enter.

Displaying Names

You can choose whether or not to display names on the chart.
Menu CHART Tab
Select Yes (visible) or No (invisible) and push Enter.
2-Depth Contour
3-Colored Depth
4-Light Sectors
5-Spot Sounding
6-Navaids
7-Names
71