Mackie ONYX 1640i Owner's Manual page 41

7. This step is optional. Remove the 14 screws from the two side trim pieces. Screw the rack ears to the mixer
where the side trim pieces used to reside. You will only use eight screws (four on each side) for the rack
ears. The trim pieces and remaining screws should be stored away for safekeeping.
8. This step does not exist. You have completly front-mounted the Onyx 1640i Pod section. There is nothing
else left to say about it, no more instructions. The thought of an almost nearly blank page is utterly
intolerable, though. And this is included for a step that is only optional, not mandatory. Oh, the humanity.
So these words are here to try and somewhat fill the gap, but it is looking like it could be difficult to keep
writing about nothing to fill up space.
9. Ok, you are still here, even
it seems to be that the
after what is written
keyboard is slowly running
above. We should probably stop while
out of ink.
Owner's Manual
we're ahead because
41