Miele DA 406 Operating And Installation Instructions page 27

a
for use when fitting the tower.
b
for securing the exhaust ducting.
c
for exhaust ducting C 125 mm (not
on ...EXT models).
d
for fitting into the exhaust connection
on the motor unit (only for air
extraction mode, not on ...EXT
models).
e
for securing the cooker hood to the
wall.
f
including directional unit and flexible
aluminium hose (the conversion kit is
not supplied with the cooker hood
but is available as an optional extra,
see "Technical data").
for securing the retaining plate to the wall.
The screws and plugs are designed
for use in solid walls only.
For other types of wall construction,
alternative fixings will be required.
Make sure that the wall is able to
take the weight of the cooker hood.
for securing the appliance.
for securing the tower.
for adjusting the height of the
appliance.
for removing the tower.
and
27