Table of Contents
Advertisement
Timer Recording
What is FREEVIEW+
FREEVIEW+ is the function that enables timer recordings to be controlled by the signal sent from the
broadcaster. "Guide Link", "Series recording" (
"Guide Link" – If you set a timer recording from the TV Guide, the recording's start and stop
times can be controlled by the broadcaster, e.g. delayed start.
This is indicated by "Guide Link" in the Timer Recording screen in step 2 (
"Split Programme" – If a programme is separated into 2 or more parts by some other
programmes e.g. news, this unit pauses recording during the gap.
This is indicated by "Split" in the Timer Recording screen in step 2 (
When setting timer from the 1st split programme, other parts of the programme will be
automatically set and indicated by the timer mark on the TV Guide, but not shown on the
timer recording list.
If you set a timer recording from the TV Guide, the recording's start and stop times are
controlled by the signal sent from the broadcaster. If the signal is not sent correctly,
the recording may lack the beginning or the ending part of the programmes.
In order to make the timer recording work successfully, we recommend you set the
start time earlier and the end time later by some minutes, up to a maximum of 10
minutes for Guide Link to function.
e.g. When you set the timer recording for a programme that will start at 10:00 and end
at 11:00, set "9:58" and "11:05" in step 3 (
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW] [VHS]
Preparation:
≥ Turn on the television and select the appropriate video input to suit the
connections to this unit.
≥ Turn on this unit.
≥ If recording to DVD or VHS, insert a disc or video cassette that you use
for recording (
15).
≥ [RAM] If the disc is protected, release protection (
≥ [VHS] Ensure accidental erasure tab is intact.
≥ Confirm that the clock on the unit's display is set to the correct time.
1
– The GUIDE Plus+ list appears.
3, 4, 2, 1 to select the future programme,
2
then
OK
TV Guide:
Landscape
All Types
Tue 12th
Tue 12/10/10
12:53
2 BBC 2
Holiday Programme
Time:
BBC 1
BBC 2
Channel 4
Channel 5
2
-24
hours
+24
hours
Prog. Type
TIMER REC
OPTION: Select Advert, etc.
info
Guide Change Display Mode
RETURN
– If "Selection Screen" appears, press [3, 4] to select "Single Timer Rec.", then
press [OK]. Refer to "Series recording" (
Confirm the programme (start
3
and end time) by TV magazine,
etc. and correct if necessary
using 3, 4, 2, 1 then
– The settings are stored and the timer programme is on.
– The timer icon is displayed.
– "F" lights on the unit's display to indicate timer recording standby has been activated.
– Repeat steps 2–3 to programme other recordings.
– Press [Í] to turn the unit off.
≥"Guide Link" will not be displayed and will not function under the following conditions.
– Timer programmes set manually (
– Timer programmes set from the TV Guide are modified or start/stop time
changed by more than 10 minutes from original time.
(Series): Series recording (
(Split):
The programme is split in two or more parts by other programmes. This
unit pauses recording during the gap between the parts of the
programme.
?
TM
36), and "Split Programme" are available.
below).
76).
Timer
Remain
HDD
Recording
VHS
Channels
Selection screen
All
TUE 14.10.08 12:54:00
Channel
Date
Start
The West Tonight
2 BBC 2
12/10 TUE
20:30
3 TV
All Channels : BBC 2
News & Factual
Holiday Programme
TUE 14.10.08
(Guide Link)
18:00 18:30
Press OK to store the programme.
Category
OK
OK
DELETE
Page
RETURN
RETURN
Page
"Guide Link", "Split" and "Series" are displayed here.
36) for "Series Timer Rec.".
y
OK
Timer icon
32).
36) is set.
below).
below).
Tips
≥To check programmes (
≥To cancel a timer recording
programming
1 Press [3, 4, 2, 1] to select the
2 While "Delete" is selected, press [OK].
30:24 SP
DVD
1:58 SP
3 Press [2, 1] to select "Yes" and press
2:59 SP
Tue 12/10/10
12:53:00
Stop
Mode
STTL
AD
Drive
View
≥To record sound using LPCM (XP mode
OFF
22:30
HDD
SP
OFF
Single Timer Rec
only):
Series Timer Rec
Delete
Set the "Audio Mode for XP Recording" to
Programme Name
"LPCM" in the Setup menu (
Series Info
Notes
--
0
9
Number
≥[RAM] [-RW‹V›] [+R] [+RW] To use a new disc,
formatting is necessary. (
≥The GUIDE Plus+ list is not displayed
immediately after initial tuning is done.
≥The GUIDE Plus+ system will not work if
the clock is not set correctly.
≥If "NTSC" has been selected for "TV
System" (
cannot be used.
≥"FR" recording mode is not available when
the timer programme is controlled by
"Guide Link".
≥The receipt of the GUIDE Plus+ system
data is only possible via the aerial input of
this unit. The receipt of the TV Guide data
via externally connected satellite receivers
is not possible.
≥If you set a timer recording that will overlap
with other timer recordings, the "Overlapped
Timer Recording" screen appears to help
you resolve the overlapping.
Follow the on-screen instructions.
≥Simultaneous recording to two or more
drives is not possible.
TV
VOL
CH
DRIVE
SELECT
AV
TRACKING/V-LOCK/PAGE
2
3
1
CH
4
5
6
PROG/CHECK
8
9
7
CHAPTER
0
DELETE
INPUT
SELECT
RESET
SLOW/SEARCH
SKIP/INDEX
REW
FF
STOP
PAUSE
PLAY
STATUS
EXIT
PAUSE LIVE TV
OK
OPTION
RETURN
MANUAL SKIP
33)
programme (the timer icon is
displayed) and press [OK].
[OK].
– The timer icon disappears.
81)
28, 76)
82), the GUIDE Plus+ system
23
VQT2J45
Hide quick links:
Advertisement
Table of Contents
