Direct Call - Panasonic KX-TCD965EC Operating Instructions Manual

KX-TCD965EC-3(42~53) 99.9.27 8:02 PM

Direct Call

You can easily make a call using a stored direct call number by pressing
still be accepted. To use this feature, store the direct call number and turn on the mode by programming.
When the direct call mode is on, you can ONLY dial the number stored in the direct call memory.
The factory preset is OFF.
Setting the Direct Call Number and Mode
1
Press .
F
2 Press G or F until the arrow points to
"Program".
3
OKH
Press .
Press G or F until the arrow points to
4
"Call Option".
5
OKH
Press .
Press G or F until the arrow points to
6
"Direct Call No.".
7
Press OKH .
< E n t e r P h o n e N o >
8
Enter the phone number, up to 24 digits.
If you misdial, press I. The digits are
erased from the right. To erase all digits,
press I firmly.
9
OKH
Press .
Dialling the Stored Number
Make sure that "Direct Call" is displayed, then press
The number stored in the direct call memory is dialled automatically.
When the handset is in "Direct Call" mode emergency calls can not be made until direct call is
cancelled.
46
Page 46
10
While the arrow is at "Save", press
OKH .
11
While the arrow is at "ON", press
A confirmation tone sounds.
The display will return to "Direct Call
No.".
12
Press C to return to the stand-by
mode.
1 0 N e w C a l l s
Direct Call
You can exit the programming mode any time
by pressing C .
To turn OFF/ON the direct call
mode
Follow steps 1 to 5. In step 6, press G or F
until the arrow points to "Direct
ON/OFF" then press OKH
to select OFF or ON and press
finished, press C .
When set to off, "Direct Call" will go out.
.
. Incoming calls can
OKH .
. Press G or F
OKH
. When