Time And Day Adjustment - Panasonic KX-TCD965EC Operating Instructions Manual

KX-TCD965EC-1(2~25) 99.9.27 8:05 PM
Preparing the Answering System

Time and Day Adjustment

Voice Time/Day Stamp: During playback, a synthesised voice will announce the time and day that
each message was recorded.
1
Press .
F
Press G G or F F until the arrow points to
2
"Program", then press OKH H .
Press G G or F F until the arrow points to
3
"Setting Base", then press OKH H .
"Input Command" is displayed.
4
Press .
"Remote Operation" is displayed on
the handset.
" P " is displayed on the base unit.
5
Press 0 .
" " is displayed on the base unit.
"Set time" is announced.
If previously adjusted, the time/day will be
heard.
6
Enter the current time (hour and minute)
using a 4-digit number. (Ex. To set 9:30,
enter "0930".)
The entered number is displayed on the
base unit.
7
Press to select "AM" or "PM".
Press repeatedly to set the day.
The unit announces the day.
Press OKH H .
8
The unit announces the time/day. The
clock starts working.
You can exit the programming mode any time
by pressing .
C
22
Page 22
In step 7, you cannot enter numbers greater
than 12. Do not use 24 hour clock. (To set
13:00 hours, enter "0100" and select "PM" by
pressing .)
The accuracy of the clock is approximately
±45 seconds a month at room temperature.
If a power failure occurs, the adjusted time/day
will be erased.
To check the time/day
1
Press .
F
Press G G or F F until the arrow points to
2
"Program", then press OKH H .
Press G G or F F until the arrow points to
3
"Setting Base", then press OKH H .
4
Press .
5
Press 0 .
The current time/day is heard. When
finished, press OKH.