Guide To Sms Settings - Panasonic KX-TCD820FX Operating Instructions Manual

TCD820FX(e-e).book Page 50 Tuesday, September 13, 2005 9:10 AM
SMS (Short Message Service)
k
5
Continue from step 5, "Writing and
sending a new message", page 48.
Editing/forwarding a message
1
While reading a received message,
press ".
2
"Edit Message" i #
3
Continue from step 3, "Writing and
sending a new message", page 48.
Erasing received messages
1
While reading a received message,
press ".
2
"Erase" i #
L To erase all messages, select "Erase
All". i #
3
"Yes" i # i {ih}
Storing the sender's number in
the handset phonebook
1
While reading a received message,
press ".
2
"Add Phonebook" i #
3
Continue from step 3, "Adding entries to
the handset phonebook", page 19.
Editing the sender's number
before calling back
1
While reading a received message,
press ".
2
"Edit and Call" i #
3
Edit the number. i {C} / {s} / #

Guide to SMS settings

If the base unit is reset to its default settings
(page 41), the following SMS-related
settings will be reset. The contents of the
receive and send lists will be erased.
50
SMS settings
SMS on/off (default:
*1
"Off")
Message Centre 1
Message Centre 2
PBX line access number
(default: "Off")
*1 If you set the unit's region setting (page
41) to "CZ" or "SK", the default setting is
"On".
Storing the PBX line access
number (for PBX users only)
Store your PBX line access number (4 digits
max.) so that SMS messages are sent
properly. When sending SMS messages to
entries in the handset phonebook or redial
list, the PBX line access number will be
deleted.
1
" (centre of joystick) i k i #
2
"Settings" i #
3
Enter the base unit PIN (default:
"0000").
4
"PBX Access No." i #
5
"On" i #
6
Enter your PBX line access code and a
dialling pause, if necessary. i #
7
"Save" i # i {ih}
Page
page 47
page 47
page 47
page 50