Guide To Sms Settings - Panasonic KX-TCD210G Operating Instructions Manual

Digital cordless phone
Hide thumbs Also See for KX-TCD210G:
Table of Contents

Advertisement

TCD210G(e-g).book Page 32 Friday, January 14, 2005 1:42 PM
SMS (Short Message Service)
4
Edit the destination phone number and/or
press {j/OK}.
5
Continue from step 7, "Writing and sending a
new message", Seite 30.
Editing/forwarding a message
1
While reading a received message, press
{j/OK}.
2
Select "Nachr.Editieren", then press
{>}.
3
Continue from step 5, "Writing and sending a
new message", Seite 30.
Erasing received messages
1
While reading a received message, press
{j/OK}.
2
Select "Löschen", then press {>}.
L To erase all messages in the selected
mailbox, select "Alle löschen", then
press {>}.
3
Select "Ja", then press {>}.
4
Press {ih}.
Storing the sender's number in the
phonebook
1
While reading a received message, press
{j/OK}.
2
Select "Telbuch hinzuf.", then press
{>}.
3
Continue from step 3, "Adding entries to the
phonebook", Seite 14.
Editing the sender's number before
calling back
1
While reading a received message, press
{j/OK}.
2
Select "Bearb.&Anrufen", then press
{>}.
3
Edit the number, then press {C} or {s}.
32

Guide to SMS settings

If the base unit is reset to its default settings
(Seite 26), the following SMS-related settings will
be reset.
SMS settings
Default
setting
SMS on/off
Ein
Message
09003266
Centre 1
900
Message
Centre 2
Private
mailboxes
PBX line access
Aus
number
Hinweis:
L If the base unit is reset to its default settings,
the contents of the receive and send lists will
be erased.
Creating private mailboxes
Private mailboxes can be used for sending and
receiving SMS messages. Each private mailbox
is password protected.
1
Press {j/OK}.
2
Select "SMS", then press {>}.
3
Select "Allgemein", then press {>}.
4
Select "Einstellungen", then press {>}.
5
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (Seite 26).
6
Select "Private Mailbox", then press
{>}.
7
Select the desired new mailbox number
("Mailbox1" to "Mailbox6"), then press
{>}.
8
Enter a name for the mailbox (5 characters
max., Seite 34), then press {j/OK}.
9
Enter a 4-digit password for the mailbox, then
press {j/OK}.
10
Select "Speichern", then press {>}.
11
Press {ih}.
Page
Seite 29
Seite 29
Seite 29
Seite 32
Seite 33

Advertisement

Table of Contents
loading

Table of Contents