Camera Setting - Panasonic WV-CW860 Operating Instructions Manual

ON: The last displayed still image is shown till the camera finishes
moving to a preset position. However, the still image may be
distorted with the effect of panning or tilting.
OFF: The current image is being displayed while the camera is
moving to a preset position.

Camera Setting

To Display the Camera Setting Menu
• Move the cursor to CAMERA O, and press the CAM (SET) key.
The camera setting menu appears.
Camera Identification (CAMERA ID)
1. Move the cursor to CAMERA ID, and select ON to display the
camera identification by using the joystick.
The factory default setting is OFF.
2. Follow the steps below to edit the camera ID characters:
2-1 Move the cursor to CAMERA ID and press the CAM (SET) key
to display the character editing menu.
2-2 Move the cursor to the character you want to edit or change
by using the joystick, and press the CAM (SET) key. The
selected character appears in the editing area.
2-3 Repeat the steps above until all characters are edited.
3. After editing the camera identification characters, follow the steps
below to decide the position of the CAMERA ID.
3-1 Move the cursor to POSI, and press the CAM (SET) key to
display the ID position menu.
3-2 Decide the position of the camera ID by using the joystick.
Press the MON (ESC) key to fix the position, and return to the
character editing menu.
Notes:
• When you want the pointer to move to a specific character in
the editing area, select a new character, and press the CAM
(SET) key. This function allows you to edit or correct a specif-
ic character.
• To enter a blank space into the camera ID, move the cursor to
SPACE, and press the CAM (SET) key.
• To erase all characters in the editing area, move the cursor to
RESET, and press the CAM (SET) key.
36
Setup menu
** SET UP MENU **
PRESET 1
MAP
HOME POSITION OFF
SELF RETURN OFF
AUTO MODE OFF
AUTO PAN KEY AUTO PAN
DIGITAL FLIP ON
LOCAL/REMOTE LOCAL
SPECIAL1
CAMERA
RS485 SET UP
Camera setting menu
** SET UP **
CAMERA ID OFF
ALC/MANUAL ALC
SHUTTER OFF
AGC ON(MID)
SENS UP X2 AUTO
SYNC INT
WHITE BAL ATW1
MOTION DET OFF
AF MODE MANUAL S
RET SPECIAL2
** SET UP **
CAMERA ID ON
ALC/MANUAL ALC
SHUTTER OFF
AGC ON(MID)
SENS UP X2 AUTO
SYNC INT
WHITE BAL ATW1
MOTION DET OFF
AF MODE MANUAL S
RET SPECIAL2
Character editing menu
CAMERA ID.––
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$ÄÜÖÆÑÅ
SPACE
–––– POSI RET RESET
CAM1............
CAM1