Auto Mode Selection (Auto Mode) - Panasonic WV-CW860 Operating Instructions Manual

Auto Mode Selection (AUTO MODE)

1. To set auto mode
Move the cursor to AUTO MODE and select a mode by moving
the joystick to the right or left.
The factory default setting is OFF.
Modes change as follows:
OFF
OFF: No automatic operation. The camera can be operated only
manually.
SEQ: The camera operates in the sequence of preset positions in
numerical order.
SORT: The camera operates in the sequence of preset positions
counterclockwise from the Pan/Tilt starting point.
AUTO PAN: The camera automatically turns within the preset
panning range.
PATROL: The camera operates in the patrol-learn function.
2. When the AUTO PAN mode is selected, set details as follows:
Move the cursor to AUTO PAN O and press the CAM (SET) key
to display the AUTO PAN setting menu.
3. To set a panning starting point and panning endpoint
Follow the steps below.
(1) Move the cursor to POSITION and press the CAM (SET) key.
The cursor moves to START.
(2) Move the joystick to the right or left to select a panning start-
ing point and press the CAM (SET) key.
This determines the starting point and the cursor moves to
END.
(3) Move the joystick to the right or left to select a panning end-
point and press the CAM (SET) key.
This determines the endpoint and the cursor moves to POSI-
TION.
4. To set a panning speed
Move the cursor to SPEED, and set a panning speed by moving
the joystick to the right or left .
The panning speed increases when the joystick is moved to the
right, and decreases when it is moved to the left.
Caution: If the panning range is changed after the camera has not
panned for a long time or has been panning in the same panning
range, the picture may not be clear or noise may appear. In this
case, pan the camera fully several times.
If this does not eliminate the problem, refer servicing to qualified
service personnel.
23
SEQ SORT AUTO PAN PATROL
Setup menu
** SET UP MENU **
PRESET 1
MAP
HOME POSITION OFF
SELF RETURN OFF
AUTO MODE AUTO PAN
AUTO PAN KEY AUTO PAN
DIGITAL FLIP ON
LOCAL/REMOTE LOCAL
SPECIAL1
CAMERA
RS485 SET UP
AUTO PAN setting menu
** AUTO PAN **
POSITION START
END
SPEED ••••|••••
L H
PAN LIMIT OFF
ENDLESS OFF
DWELL TIME 1S
RET
** AUTO PAN **
POSITION START
END
SPEED ••••|••••
L H
PAN LIMIT OFF
ENDLESS OFF
DWELL TIME 1S
RET
** AUTO PAN **
POSITION START
END
SPEED ••••|••••
L H
PAN LIMIT OFF
ENDLESS OFF
DWELL TIME 1S
RET
** AUTO PAN **
POSITION START
END
SPEED ••••|••••
L H
PAN LIMIT OFF
ENDLESS OFF
DWELL TIME 1S
RET