Panasonic WV-CW860 Operating Instructions Manual page 30

Patrol-learn with a Controller Having the PATROL Key
1. Press the PATROL LEARN key and PROGRAM key simultaneous-
ly to start patrol-learn. The setup menu displays "LEARNING", and
the starting points are stored.
2. Operate patrol-learn manually. The operation data is stored.
3. To stop patrol-learn, press the PATROL STOP and PROGRAM key
simultaneously.
Patrol-learn with a Controller not Having the PATROL Key
1. Select patrol-learn in the setup menu, and then close the menu.
Starting points are stored and "LEARNING" appears on the monitor screen.
2. Operate patrol-learn manually.
3. Open the SET UP menu to stop learning.
Notes:
• It is recommended to set PAN LIMIT to ON for patrol-learn. Otherwise PAN LIMIT is invalid in
playback.
• If the power fails during the patrol-learn mode, start the patrol-learn function again from the start-
ing point.
• LEARN also stops 30 seconds after starting if the memory is full.
• Auto refreshing may be activated during the patrol play mode or the auto mode to calibrate the
lens position.
Patrol Play with a Controller Having the PATROL Key
1. Press the PATROL PLAY key. The camera turns to the starting point and reproduces the operations
stored in the memory. Iris operation is valid only in the playback mode.
2. Press the PATROL STOP key and PROGRAM key simultaneously to stop playback or press any man-
ual operation key (e.g., PAN/TILT/ ZOOM/FOCUS) except the iris keys.
Patrol Play with a Controller not Having the PATROL Key
1. Select patrol play in the setup menu, and then close the menu. The camera turns to the starting point
and the operations stored in memory are reproduced. Iris operation is valid only in the playback
mode.
2. Open the SET UP menu, or press any manual operation key (e.g., PAN/TILT/ ZOOM/FOCUS) except
the iris keys to stop playback.
Patrol Play with the AUTO PAN Key
1. If the PATROL PLAY function is assigned to the AUTO PAN key, press the AUTO PAN key to turn the
camera back to the starting point and to reproduce the operation data stored in the memory.
2. To stop playback, press the PATROL STOP key and PROGRAM key simultaneously or any manual
operation key (e.g., PAN/TILT/ZOOM/FOCUS) except the iris keys.
Notes:
• During the patrol play mode, the camera movement may occasionally deviate from the entered rou-
tine when the routine includes a move to a preset position. If this happens, re-enter the routine of
manual operations for patrol-learn.
• During the patrol play mode, black and white automatic switching does not work.
• During the patrol play mode, when the power of the controller is turned on or off, the patrol play
stops. In this case, press the PATROL PLAY key again. (If SELF RETURN is set to ON, the patrol play
will start again after elapsing the setting return time.)
31
PATROL LEARN
LEARNING