Panasonic WV-CW860 Operating Instructions Manual page 26

3. To register a new zone
3-1 For PAN/TILT, move the cursor to PUSH SET and press the
CAM (SET) key.
3-2 Adjust the pan and tilt position so that the desired position
comes into the zone frame by using the joystick.
Note: Zone setting is not available while the zone frame is not
shown, for example, when the camera is tilted downward by
more than 45 °.
3-3 For ZOOM/FOCUS, move the cursor to PUSH SET , and press
the CAM (SET) key.
3-4 Adjust zoom and focus, and press the CAM (SET) key.
Zoom can be adjusted within the range of 1 to 10 magnifica-
tions.
3-5 Move the cursor to ZONE SCALE, and move the joystick to
the right or left to adjust the zone frame. Press the CAM (SET)
key after the adjustment.
Moving the joystick in the L direction decreases the zone
frame, and moving it in the H direction increases it. However,
the aspect ratio is fixed at 3 to 4.
The privacy zone setting has been completed.
The menu returns to the ZONE NUMBER setting menu. If DEL
is selected, zone setting is released and the ZONE NUMBER
setting menu appears.
Notes:
• To complete new settings and repeat other settings, move the
cursor to SET and press the CAM (SET) key. The ZONE NUM-
BER setting menu returns.
• To cancel new settings and return to the SPECIAL 1 menu,
move the cursor to DEL and press the CAM (SET) key. New
settings are not registered.
• To complete new settings and return to the SPECIAL 1 menu,
move the cursor to RET and press the CAM (SET) key.
27
PAN/TILT setting menu
** ZONE NUMBER 1*/8 **
PAN/TILT PUSH SET
ZOOM/FOCUS PUSH SET
U TILT D/L PAN R
ZONE SCALE ••••|••••
SET DEL – +
RET
ZOOM/FOCUS setting menu
** ZONE NUMBER 1*/8 **
PAN/TILT PUSH SET
ZOOM/FOCUS PUSH SET
U ZOOM D/L FOCUS R
ZONE SCALE ••••|••••
SET DEL – +
RET
ZONE SCALE setting menu
** ZONE NUMBER 1*/8 **
PAN/TILT PUSH SET
ZOOM/FOCUS PUSH SET
ZONE SCALE ••••|••••
SET DEL – +
RET