Panasonic WV-BS300 Operating Instruction page 13

• The display position of the camera ID on the monitor screen can be
placed anywhere on the screen by using the joystick.
Notes:
1. The positioning of the camera ID stops at the edges of the
monitor screen.
2. The camera ID moves faster when the joystick is kept pressed for
more than 0.5 seconds.
• After completing the positioning of the camera ID, press the CAM
(SET) button to return to the character editing menu.
• To return to the normal camera picture mode, move the character
cursor to "END" and press the CAM (SET) button.
• To return to the setup menu for setting other items, move the
character cursor to "RET" and press the CAM (SET) button.
2. Light Control Setting (ALC/MANUAL)
• Display the setup menu.
• If necessary, refer to "Setup Menu Display" on page 8 for details on
displaying the setup menu on the monitor screen.
• Move the cursor to "ALC/MANUAL" and select either "ALC" or
"MANUAL" by using the joystick.
Note:
The back light compensation setting submenu associated with
this menu is described separately and should be setup after
installing the camera at the site and observing the actual site
picture.
3. Back Light Compensation Setting (BACK LIGHT COMP)
(1) ALC Mode
• Confirm that "ALC" is selected as follows.
• Display the setup menu.
• If necessary, refer to "Setup Menu Display" on page 8 for details on
displaying the setup menu on the monitor screen.
• Move the cursor to "ALC/MANUAL" and select "ALC" by using the
joystick.
- 10 -
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789
().,'":;&#!?=
+-*/%$ÄÜÖÆÑÅ
SPACE
POSI RET RESET
WV-BS300.......
Setup menu
** SET UP **
CAMERA ID OFF *
ALC/MANUAL ALC *
SHUTTER OFF
AGC ON
SYNC INT
AUTO PAN OFF
SPECIAL *
Back light compensation menu
* ALC CONT *
BACK LIGHT COMP
PRESET OFF
MASK SET *
LEVEL ....I....
RET
* ALC CONT *
BACK LIGHT COMP
PRESET OFF
MASK SET *
LEVEL ....I....
RET
+
+