Table of Contents
Advertisement
4. To set a speed
Move the cursor to "SPEED", and move the joystick to the left or right
to set a panning speed as desired.
Panning speed increases when the joystick is moved leftward, or
decreases when it is moved rightward.
5. To set endless turn ON/OFF
Move the cursor to "ENDLESS", and move the joystick to the left or
right to select the "ON" or "OFF" mode below:
ON: The camera pans from the start position to the end position, then
keeps rotating in the same direction to return to the start position.
OFF: The camera pans from the start position to the end position,
then rotates backward to the start position.
This reciprocating operation is repeated.
Note: When the panning, tilting, lens zoom or focus operation is
controlled manually, the "AUTO" mode function should be
canceled.
For activating the "AUTO" mode, select the "AUTO" mode again.
8. Special Menu
This menu lets the customer adjust and setup the video signal of the
camera to meet the customer's requirement.
• Display the setup menu.
• If necessary, refer to "Setup Menu Display" on page 8 for details on
displaying the setup menu on the monitor screen.
• Move the cursor to "SPECIAL" and press F2 button of WV-CU550A.
The "SPECIAL" menu is displayed as shown below.
(1) Aperture Level Setting (AP GAIN)
• Move the cursor to "AP GAIN". The cursor "l" starts blinking.
• While observing the video monitor, adjust the aperture level by
controlling the joystick. The cursor "l" moves to the left (soft) or right
(sharp).
(2) Pedestal Level Setting (PEDESTAL)
• Move the cursor to "PEDESTAL". The cursor "l" starts blinking.
• While observing the waveform monitor/oscilloscope or video monitor,
adjust the pedestal level (black level) by moving the joystick. The
cursor "l" moves to the left (low, dark) or right (high, bright).
- 15 -
** AUTO PAN **
POSITION
START
END
SPEED
...I....
L
H
ENDLESS
ON
STOP TIME
2S
RET
** AUTO PAN **
POSITION
START
END
SPEED
...I....
L
H
ENDLESS
ON
STOP TIME
2S
RET
Camera setting menu
** SET UP **
CAMERA ID
OFF *
ALC/MANUAL
ALC *
SHUTTER
OFF
AGC
ON
SYNC
INT
AUTO PAN
OFF
SPECIAL *
* SPECIAL *
AP GAIN
....I....
PEDESTAL
.I.......
CAMERA RESET
PUSH SW
RET
* SPECIAL *
AP GAIN
....I....
PEDESTAL
.I.......
CAMERA RESET
PUSH SW
RET
+
+
Advertisement
Table of Contents
