Panasonic ICX Technical Manual page 27

Chapter 5.Tuning the Commands to Your Voice
ADAPTING
STORED
SPEECH TOO LONG
BAD TRAINING
REPHRASE
10:00 SAT JAN 10
-EXT100 100
Notes: • To abort the retraining procedure at any point before step 10, simply
ICX-25-770
other choices." Press the "Go Back" Soft Key [EXEC] to go
back to step 6 and repeat the process.
9. Again say the control command to be retrained.
Voice Guidance responds with "Say it again".
#2
Example: Say "Complete"
it again".
10. Again say the control command to be retrained.
Voice Guidance responds with '"
tone sounds.
After storing your own voice in the system, execution returns to
step 6.
Example: Say "Complete"
'"Complete" stored'.
To continue retraining other commands, repeat steps 7 to 10.
• If the spoken command is too long
The following message is displayed and Voice Guidance
responds with "Try again". Repeat the procedure from step 8
making the command shorter. (The maximum recording time
per entry is 2.5 seconds.)
• If the tone used in step 10 differs from that used in step 9
The following message is displayed and Voice Guidance
responds with "Try again". Repeat the procedure from step 8.
• If the recorded name is identical to an existing entry
The following message is displayed and Voice Guidance
YES
responds with "'
to step 8. Create the entry using a different name.
11. Replace the handset.
replace the handset.
• You can press the Cancel Key at any point to display the TOP
MENU, allowing you to store new entries or edit or delete existing
entries. This function can be useful if you want to check the
contents of the Phonebook or place a call during the retraining
procedure.
ICX issued August 1998
Section 770-Voice Recognition Telephone
Voice Guidance responds with "Say



Voice Guidance responds with



' Conflict. Try again." Enter "Yes" to return
" stored' and the Splash
27