Panasonic ICX Technical Manual page 26

Section 770-Voice Recognition Telephone
SYSTEM
RESET TRAIN
WORD TO TRAIN ?
GO BACK
PHONEBOOK FULL
TRAIN GO BACK
NO
ADAPTING
GO BACK
26
5. Say "System".
Voice Guidance responds with "Reset or Train?"
6. Say "Train".
Voice Guidance responds with "Retrain which word?"
• If the Phonebook memory is full
The following message is displayed on the screen and Voice
Guidance says "Phonebook Full sorry". If you want to continue
retraining the commands, you must first delete any unwanted
entries. (See Chapter 4, "Deleting a Phonebook Entry" (page
20).)
7. Say the command you want to train.
COMMANDS:
Cancel
Go Back
Number
Complete
Train
Voice Guidance responds with '"
Note: You cannot use the following spoken commands: "Go Back",
"Cancel", or "Repeat". Press the Soft Key [EXEC] or Cancel Key.
Example: To train "Complete"
Say "Complete".
YES
'"Complete" Right?".
8. If the control command reiterated by Voice Guidance is correct,
say "Yes". If not, say "No".
• "Yes"
Voice Guidance responds with 'Say "
Example: "Yes"
#1
"Complete"?'
• "No"
Voice Guidance speaks the next control command. After
speaking all the control commands, Voice Guidance says "No
ICX issued August 1998
Chapter 5.Tuning the Commands to Your Voice
Call Program
Yes No
Delete Name
Add System
Reset Repeat



Voice Guidance responds with
Voice Guidance responds with 'Say
Change
List
Back Space
Delete All
" Right?'



"?'
ICX-25-770