Panasonic ICX Technical Manual page 6

Section 770-Voice Recognition Telephone
Note 1: Even if some feature access code is assigned on FF12 Key, (there is
7) REDIAL Key
8) Telephone number button
9) VOLUME Key
6
no error tone when storing some feature on it.) this key can work as
START/END Key only, when the Voice Recognition Adapter is
attached on the phone.
2: "Initializing
• • • • •
initializing the system. During this period, to enter the voice
recognition mode is not available even if the FF12 Key is pressed.
3: After entering the Voice Recognition mode by pressing FF12 Key,
the LED of other FF keys go OFF even if the COs are in use or
some features registered on are activated.
Once getting off this mode, LEDs return to the original status.
Use this key to insert a pause when recording a phone number.
Use these buttons for entering telephone numbers when recording and
modifying entries.
The volume can be adjusted in 5 steps. Press the
volume, or the button to decrease the volume. When you replace the
handset, the volume is reset to the medium value.
ICX issued August 1998
" is displayed and FF12 Key blinks Green when
Chapter 1. Installation
button to increase the
ICX-25-520