Setting The Altitude - Miele DG 2661 Operating And Installation Instructions

Setting the altitude

This process rinses the water lines and
sets the unit to the water boiling
temperature which varies depending on
the altitude in your area.
^ Open the door by pushing on the left
side of the door release.
The door opens.
^ Take the steam generator from the
appliance and take the insert out, see
"Cleaning and Care".
^ Rinse the steam generator and insert
with hot water. Do not use soap.
Do not wash the steam generator or
the insert in a dishwasher!
Do not submerge the steam
generator in water!
^ Start the cooking program "Cook
Universal" 212°F (100°C) and run for
15 minutes. Proceed as described in
"Using the steam oven".
Before the first use
Relocating
When relocating to a new area, reset
the unit's water boiling temperature by
descaling the appliance. See "Cleaning
and Care" for more information.
Setting the altitude for the first time and
after relocation will produce more
steam than usual. This is not a fault.
15