Installing The Appliance - Miele DG 2661 Operating And Installation Instructions

Installing the appliance

^ Install the supplied wooden strip h
on the left side in the niche with the
two supplied screws g 3 x 20 mm
(see illustration).
The measure x is at a niche height of:
3
13 / " (350 mm) =
4
3 3
1 / " ± / " (30 ± 5 mm)
16 16
1
14 / " (360 mm) =
16
9 3
1 / " ± / " (40 ± 5 mm).
16 16
^ Push the appliance into the niche.
^ Mark the holes.
^ Pull the oven out.
^ Drill two left fixing holes with a
(2 mm) diameter bit.
^ Push the oven in and align.
^ Open the oven door and using the
supplied screws i 3.5 x 25 mm right
and j 3.0 x 20 mm left, secure it to
the cabinet through the holes on
either side of the vertical oven trim.
Installation
1
/ "
16
57