Midas PRO SERIES Owner's Manual page 453

Using the PRO Series updater
>> To update your PRO Series Live Audio System with the latest version of
host software
1
Mute the PA at the amplifier/speaker. Refer to the
of this section.
2
Insert the USB memory stick into the active USB socket of the PRO Series Control
Centre (see "Saving your show files to a USB memory stick" on page 123).
3
Depending on how many .tar files there are in the "DL3Upgrades" folder of the
USB memory stick, one of the following will happen:
• One .tar file
• More than one .tar file
4
Do one of the following:
• In the "Run upgrade utility?" window, click OK. (Clicking Cancel will cancel
• In the multiple upgrades window,
5
The updater will be launched, displaying
the following in the upper-left corner of
the screen.
The "PREPARING UPDATER" screen will open, and the status bar text will inform
you of the updater progress.
When the updater preparation has
finished (as shown right) the status bar
text will read "Select items for upgrade".
6
Select the devices you want to update
by doing any of the following:
• Select all
• Select a single device
• Deselect a single device
• Deselect all
PRO Series Live Audio Systems
Owner's Manual
The "Run upgrade
utility?" window (shown right) will
open.
multiple upgrades window will open,
which contains the text: "Multiple
Upgrades found. Select the required
upgrade from the Preferences>
Upgrade menu".
the update procedure.)
click OK. Then, at the appropriate
GUI screen, choose
home Preferences
and click on the latest host software
.tar file (as shown right).
It is most likely that you
will want to select all of the devices,
so click Select All.
single device, click its device block.
deselect a selected device, click its device block.
To deselect all selected devices, click Remove All.
The
Upgrade
To select a
To
WARNING at the beginning
411