Midas PRO SERIES Owner's Manual page 366

324
3
Click GEQ. in the processing area.
4
Click a non-control area of the GEQ image (shown
right) to open the GEQ window.
>> To close the GEQ window
In the GEQ window, click CLOSE.
Navigating the PEQ output bands
You can change band selection by
clicking the UP/DOWN buttons in the EQ
processing area. This will change
selection by one band at a time.
Chapter 31: Outputs
Yellow rectangle
shows which four
bands are currently
displayed. Bands are
shown in descending
order from top to
bottom (Band 6 is
top).
Band navigation
buttons
PRO Series Live Audio Systems
Owner's Manual