Technical Specifications; Audio; Digital; Parameters - Midas PRO SERIES Owner's Manual

Technical specifications

Technical specifications

Audio

Frequency response
Dynamic range

Digital

Arithmetic processor
Reverberation
Effects

Parameters

Pre-delay
Pattern (density)
Level (depth)
Decay time
Room size
LF decay
HF decay
Since the above reverberation parameters are optimised to ensure authentic acoustical
simulation, they are by necessity program-dependent.

Controls

Input mute
Reverb mute
Input level control
Headroom indicator
Display
PRO Series Live Audio Systems
Owner's Manual
+1, -2dB (20Hz to 12kHz)
85dB typical
32-bit
Hall, Plate, Chamber and Room, with five variations of each
Alive, Non-Linear, Reverse, Delay, ADT, Multitap Echo,
Sound-On-Sound and Infinite Room
0 to 990ms
Adjustable 0 to 9 increments (Grainy to Dense)
Adjustable 0 to 9 increments (Distant to Close)
0.1 to 18 seconds
8 to 90 metres linear dimension
Adjustable ±7 increments ref.
1kHz decay time
Adjustable ±7 increments ref.
1kHz decay time
Removes audio feed from reverberation section.
Clears unwanted reverberant signal.
From 6dB gain to infinite attenuation.
10-point LED display, 0dB to -27dB.
Simultaneous display of all parameter information.
Parameter selection and store functions are verified by
individual LEDs.
377