HANNspree HF257 User Manual page 16

User's Manual
H-POSITION
V-POSITION
CLOCK
PHASE
SHARPNESS
VIDEO MODE
RESPONSE TIME
OSD SETTING
LANGUAGE
H-POSITION
V-POSITION
TRANSPARENCY
OSD TIME-OUT
Select the 「H-POSITION」 option to shift the screen image to the
left or right. Enter the option and adjust the level.
only]
Select the 「V-POSITION」 option to shift the screen image up or
down. Enter the option and adjust the level.
Select the 「CLOCK」option to reduce the vertical flicker of
characters on the screen. Enter the option and adjust the level.
[For VGA only]
Select the「PHASE」option to reduce the horizontal flicker of
characters on the screen. Enter the option and adjust the level.
[For VGA only]
Select the「SHARPNESS」option to adjust the sharpness of the
display. Set the value from -2 to 2.
Choose「VIDEO MODE」or 「PC MODE」for video
transmission. While using HDMI or HDMI to DVI ports for
video transmission, the video will appear cut off slightly around
the edge; choose「PC MODE」to view videos with complete
image. (VIDEO MODE only functions for inputs from HDMI or
DVI that supports HDCP video (YUV format))
Setup the display response time through the Response time
function. Available settings are MINIMUM,
INTERMEDIATE, and MAXIMUM.
specific models only.]
Select 「LANGUAGE」 option to change the language of the
OSD. Enter the option and select a language.
the OSD Language depends on the selected model]
Select 「H-POSITION」 option to adjust the horizontal position of
the OSD. Enter the option and adjust the level.
Select 「V-POSITION」option to adjust the vertical position of
the OSD. Enter the option and adjust the level.
Select 「TRANSPARENCY」 option to adjust the transparency of
the OSD. Enter the option and adjust the level.
Select 「OSD TIME-OUT」option to set the OSD time out from
10 to 100 seconds. Enter the option and adjust the level.
16
[For VGA
[For VGA only]
[This feature is limited to
[Reference only,