Sign in today to find solutions:

Don't have an account? Sign up

 
23"/ HF237
Liquid Crystal Display

Summary of Contents

  • Page 1

    23”/ HF237 Liquid Crystal Display...

  • Page 2

    User’s Manual Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

  • Page 3

    User’s Manual RECYCLING INFORMATION We, the HANNspree care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life. These devices contain recyclable materials, which can be re-decomposed and re-integrated into brand-new marvels.

  • Page 4: Table Of Contents

    User’s Manual SAFETY NOTICE ... 5 PRECAUTIONS... 5 SPECIAL NOTES ON LCD MONITORS ... 6 BEFORE YOU OPERATE THE MONITOR ... 7 FEATURES... 7 CHECKING THE CONTENTS OF THE PACKAGE ... 7 INSTALLATION INSTRUCTIONS ... 8 POWER... 8 MAKING CONNECTIONS... 9 ADJUSTING THE VIEWING ANGLE...11 OPERATING INSTRUCTIONS ...

  • Page 5: Safety Notice, Precautions

    SAFETY NOTICE 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

  • Page 6: Special Notes On Lcd Monitors

    User’s Manual SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the • Power Switch and then turn it on again to make sure the flicker disappears.

  • Page 7: Before You Operate The Monitor, Features, Checking The Contents Of The Package

    BEFORE YOU OPERATE THE MONITOR FEATURES 23” Wide screen TFT Color LCD Monitor • Crisp, Clear Display for Windows • Recommended Resolutions: 1920X 1080 @60Hz • ® EPA ENERGY STAR • GP Green Product • Ergonomic Design • Space Saving, Compact Case Design •...

  • Page 8: Installation Instructions, Power

    User’s Manual INSTALLATION INSTRUCTIONS INSTALL INSTALLATION: 1. Align the monitor with the opening in the base. 2. Note that the longer section of the base points forward. 3. Snap the monitor into its base. A clear click sound will affirm that the base is connected correctly.

  • Page 9: Making Connections

    MAKING CONNECTIONS CONNECTING TO A PC (HF237D) Turn off your computer before performing the procedure below. 1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer’s VGA port. 2.

  • Page 10

    User’s Manual CONNECTING TO A PC (HF237H) Turn off your computer before performing the procedure below. 1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer’s VGA port. 2.

  • Page 11: Adjusting The Viewing Angle

    ADJUSTING THE VIEWING ANGLE For optimal viewing it is recommended to look at the full face of the monitor, then adjust the • monitor’s angle to your own preference. Hold the stand so you do not topple the monitor when you change the monitor’s angle. •...

  • Page 12: Operating Instructions, General Instructions

    User’s Manual OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (See Figure 5). By changing these settings, the picture can be adjusted to your personal preferences.

  • Page 13: Front Panel Control

    FRONT PANEL CONTROL Power Button: • Press this button to switch ON/OFF of monitor’s power. Power Indicator: • Blue — Power On mode. Orange — Power Saving mode. MENU / RETURN: • 1. Turn the OSD menu on/off or return to the previous menu. 2.

  • Page 14

    User’s Manual 1400x1050@RB 60Hz ↔ 1680x1050@RB 60Hz ** The screen resolutions available will depend on the purchased model. NOTES: Do not install the monitor in a location near heat sources such as radiators or air dusts, or in a • place subject to direct sunlight, or excessive dust or mechanical vibration or shock.

  • Page 15: How To Adjust A Settings

    HOW TO ADJUST A SETTINGS BRIGHTNESS/ CONTRAST BRIGHTNESS CONTRAST X-CONTRAST INPUT SETTING INPUT SETTING AUTO SEARCH COLOR SETTING WARM NATURE COOL USER IMAGE SETTING AUTO ADJUST ASPECT RATIO Adjust the brightness value of the display according to your preference. Select「BRIGHTNESS」option to adjust the brightness value.

  • Page 16

    User’s Manual H-POSITION V-POSITION CLOCK PHASE SHARPNESS VIDEO MODE RESPONSE TIME OSD SETTING LANGUAGE H-POSITION V-POSITION TRANSPARENCY OSD TIME-OUT Select the 「H-POSITION」 option to shift the screen image to the left or right. Enter the option and adjust the level. only] Select the 「V-POSITION」...

  • Page 17

    OSD COLOR SYSTEM AUDIO INPUT VOLUME MUTE DDC/CI FACTORY RESET INFORMATION To choose the color combination of the OSD window, select 「OSD COLOR」 option under 「OSD SETTING」 menu, choose modes 1/2/3. While transferring via the HDMI port, it is recommended to set AUDIO INPUT to HDMI;...

  • Page 18: Plug And Play

    User’s Manual PLUG AND PLAY Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.

  • Page 19: Technical Support (faq), Q & A For General Problems

    TECHNICAL SUPPORT (FAQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION Power LED is not on No Plug & Play The display is too dark or too bright. Picture bounces or a wave pattern is present in the picture The power LED is ON (orange) but there’s no video or no picture.

  • Page 20

    User’s Manual INPUT as a PC option, and make sure PC audio output cable is connected to monitor’s LINE IN port(or AUDIO IN port). [For HDMI Input only]...

  • Page 21: Error Message & Possible Solutions

    ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED : 1. Check that the signal-cable is properly connected, If the connector is loose, tighten the connector’s screws. 2. Check the signal-cable’s connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to unsuitable display mode, set the computer to display mode given in the following table.

  • Page 22

    User’s Manual 1280×960 @75Hz 1280×1024 @72Hz SXGA 1360×768 @60Hz SXGA 1400×1050@60Hz WXGA + 1440×900 @60Hz SXGA 1440×900 @75Hz SXGA 1600×1200@60Hz UXGA 1600×1200@60Hz WXGA + 1680×1050@60Hz WSXGA + 1920×1080@60Hz WUXGA 1920×1080@60Hz WUXGA ** We ensure that the monitor can be lighted under interlace signal mode, but we can not guarantee the image quality.

  • Page 23: Appendix, Specifications

    *** The above specification is subject to actual product specification and is subject to change without prior notice. NOTES: The Maximum Resolution will depends on the display card supporting. Related issue can refer to www.hannspree.com FAQ section. TFT Color LCD 23.0" 0.266mm(H) x 0.266mm(V) 24KHz –80KHz...

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: