Timer Recording - Panasonic PV-DM2792 Operating Instructions Manual

Timer Recording

You can set up to 8 programs to be recorded while
you are away.
1
Press PROG* to display SET
PROGRAM screen.
2
1) Press
SET PROGRAM
T I MER PROGRAMM I NG
ON T I MER
2) Press SET to
S LEEP T I MER : 00
SELECT :
• If a program is already in
SET : SET
END : PROG
memory, press
SET to select an unused
program number.
3
Press
DATE START STOP CH
7 FR I --:-- --:-- --
and SET or
TODAY
the recording DATE.
SLP
- - - - - - - - -- - - - - - - -- - - - - - -
SELE CT START DATE • 1~31 = One time
SELECT :
• DAILY = MON~FRI
SET : SET
END : PROG
• WEEKLY SUN~SAT
= Same time once a week
Example
8 9 2
31 1
Today's SELECT / Selection Order
7
Date
WEEKLY WEEKLY
(SAT) (MON)
Repeat step 3 to set:
• start time, stop time
• Channel (or LINE for outside source)
• Speed (SP, LP, SLP)
4
Press PROG to end
P DT START STOP CH SPD
1 day 9 : 00 p 12 : 00a 08 SP
the program.
2 -- -- : -- -- : -- -- --
3 -- -- : -- -- : -- -- --
4 -- -- : -- -- : -- -- -- To Enter More
CANCEL : ADD / DLT Programs,
SELECT 1 - 8 :
press
ENTER : SET
END : PROG
and SET to set a blank
program number, and
then repeat step 3.
5
Press PROG twice to exit this mode.
• If you're using a cable box, make sure that it
is tuned to the desired channel and the power
is left on for timer recording.
• PROG TIMER Indicator lights up on the unit.
30
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
All connections are made.
Your unit is plugged in.
The clock is set to correct time.
The tape is long enough.
to select The record tab is in place.
.
TIMER PROGRAMMING
display screen
.
, and
to select
to set
6
DAILY
WEEKLY
(SUN)
PROG TIMER Indicator
to select
Ready Checklist