Connections - Panasonic PV-DM2792 Operating Instructions Manual

Location of Controls (continued)
Rear View of the unit
VHF/UHF Antenna
Input Terminal
See below.
AC Power Plug
When plugged into an AC outlet,
this unit consume s 3.5 W of
electric power in OFF condition.

Connections

For ANT./Cable
Connect the cable from
Antenna/Cable to the VHF/UHF
terminal on the unit.
For DSS/Cable Box
Connect the OUT jack on your
cable box to the VHF/UHF
terminal on the unit with a RF
cable.
WARNING:
Overtightening "Nut type" RF coaxial cables
may damage jacks. Finger tighten only.
Audio Output
Connector (L/R)
Optical digital audio
output connector
IN from
ANT./CABLE
VHF/UHF
UNIT
Cable TV
Converter Box
IN from
ANT./CABLE
Pg. 12
Pg. 13
11