Table of Contents
Advertisement
Timer Recording
NUMBER keys
CANCEL
STOP
▲▼◄►
PROG/CHECK
VCR Plus +
Front view
RAM
DVD-R
Caution for Timer recording
Timer recording automatically starts at the set time.
• Timer recording can be started whether the unit is turned on
or off. When the unit is turned off, the sound and the video
cannot be outputted to the TV.
You can enter up to 16 programs up to a month in advance.
• When connecting a cable TV box or satellite receiver, the VCR Plus+
system does not work. Program the timer recording manually. (pp. 40~41)
Preparation
• Release protection before proceeding:
- Cartridge (p. 9)
RAM
- Disc (p. 60)
RAM
• Insert a disc (p. 34) and confirm there is sufficient empty space for
recording on it (p. 35). You can also confirm the disc information. (p. 60)
Using VCR Plus+ system
Entering VCR Plus+ number is an easy way of timer recording. You
can find these codes in TV listings in newspapers and magazines.
1
Press VCR Plus+.
40
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
ENTER
RETURN
REC MODE
Front Display
VCR Plus+
Remaining Recording Time
Enter the PLUS CODE with the numbered buttons.
No.
0
9
2
Press NUMBER keys to enter the VCR Plus+
number.
• Press ◄ to move back to correct a digit.
3
Press ENTER.
• When "XP" is displayed in the unit's display, the recording mode
automatically changes to "FR" in order to prevent loss of recording
when there is not enough space. Change to "XP" mode if you want to
set the timer recording using "XP" mode.
• Confirm the program and make corrections if necessary using
▲▼◄►. (See step 3 on next page.)
• You can also press REC MODE to change the recording mode.
• To enter the title of the program
Press ◄► to select "Enter Name" and press ENTER. (p. 63)
4
Press ENTER.
• The setting are stored.
• Repeat steps 1~4 to program other recordings.
5
Press RETURN.
• "
" lights on the Front Display to indicate timer recording standby
has been activated.
To cancel recording when recording has already
begun
Hold down STOP for a few seconds.
Manually programming
You can enter up to 16 programs up to a month in advance.
(Each daily or weekly program is counted as one program.)
• When connecting a cable TV box or satellite receiver, select the channel
on the cable TV box or satellite receiver before timer recording starts.
1
Press PROG/CHECK.
2
Press ▲▼ to select "New Timer Program" and press
ENTER.
Highlighted line is ready for
programming.
1:58 SP
3/29 MON 12:53 PM
Remaining Recording Time
1:58 SP
TIMER
RECORDING
3/29 MON 12:53 PM
CHANNEL
DATE
ON
OFF
MODE
39
3/29 MON
4:20 PM
5:10 PM
SP
Enter Name
Check to make sure "OK"
is displayed.
Remaining Recording Time
1:58 SP
TIMER
RECORDING
3/29 MON 12:53 PM
NO
CHANNEL
DATE
ON
OFF
MODE
CHECK
01
39
3/29 MON
4:20 PM
5:10 PM
SP
OK
New Timer Program
Remaining Recording Time
1:58 SP
TIMER
RECORDING
3/29 MON 12:53PM
NO
CHANNEL
DATE
ON
OFF
MODE
CHECK
01
64
3/29 MON
4:20 PM
5:10 PM
SP
OK
New Timer Program
Press ENTER or VCR Plus+ to
store new program.
Advertisement
Table of Contents
