Table of Contents
Advertisement
Relayed Transmission
06004000001
Setting up your DX-1000 as an Internet Relay Station
To set up your machine as a Relay Station, the following parameters must be set properly.
06004020008
Relay XMT (Fax Parameter No. 60)
1.
06004050012
Selecting whether the machine will accept and performs G3 relayed transmission. (See page 62)
1:Invalid
:Valid
2
Relay XMT Report (Fax Parameter No. 61)
2.
Selecting how the COMM. Journal for relayed transmission is sent to the originator.
1:Off
2:Always
3:Inc. Only - The COMM. Journal is sent if the Relay Communication to the destination has failed.
Relay XMT Password (User's Parameter)
3.
Enter a Relay XMT Password (up to 10 characters) to be used for protection against unauthorized
(outside) stations from accessing your machine to relay messages to a G3 fax machine via PSTN. This
password should be given out to authorized people only.
Note:
This should be different than the DX-1000's Email Address used to receive regular email / Internet Fax, as
DX-1000's Email Address is always included in the header of all email messages sent. So, anyone receiving
an Internet Fax from the machine will easily know the Relay XMT Password if it is the same as the Email
Address.
Relay Address (Auto Dialer)
4.
Enter a 3-digit Abbreviated Number which will assign the Relay Email Address of the Relay Station your
machine will use.
Manager's Email Address (User's Parameter)
5.
Register the Department Manager's Email Address for supervision and cost control purposes. Once
registered, the machine will send an email notification to this email address for each Relayed XMT
Request received from a remote station. The following information is sent.
(From : The email address of the originating station.)
(To
Domain Names (User's Parameter)
6.
Register up to 10 Domain Names (up to 30 characters) that your machine will accept Relayed
Transmission Requests to relay a message to another G3 fax machine via PSTN.
Ex: Registered Domain Names
In the example above, the Relayed XMT Request will be accepted only from the email addresses that
include the Domain Name of rdnn.mgcs.co.jp, rdmg.mgcs.co.jp or panasonic.com.
Note:
06004990007
0600407000x
#@multitude
138
- Machine will not accept a Relay XMT request.
- Machine will accept a Relay XMT request.
- Do not send
- The COMM. Journal is always sent after a Relay Communication is completed or failed.
: The telephone number of the destination G3 fax machine.)
(01):
rdnn.mgcs.co.jp
(02):
rdmg.mgcs.co.jp
(03):
panasonic.com
If all the Domain Names are left blank, the Internet Fax will accept Relayed XMT Requests from any
domain.
Advertisement
Table of Contents
