Panasonic Panafax DX-1000 User Manual page 153

07001000001
Explanation of Contents
(1) Printout date
(2) Printout time
(3) Journal number
(4) Communication result
(5) Number of pages transmitted or
received
(6) File number
(7) Duration of communication
(8) Type of communication
(9) Remote station identification
(10) Communication date
(11) Communication Start time
(12) Diagnostic
(13) Own LOGO
(14) Own ID number
(15) Own Character ID
07001110042
: "OK" indicates that the communication was successful.
"BUSY" indicates that the communication has failed because of busy line.
"STOP" indicates that STOP was pressed during communication.
"P-OK" indicates that memory overflow occurred while storing the documents
into memory for transmission but successfully stored document(s) was sent.
"R-OK" indicates that the Relayed XMT was successful.
"– –" indicates the transmission to LAN.
"3-digit Info Code" (see page 161) indicates that the communication has failed.
: The 3-digit number is the number of pages successfully transmitted or
received.
When the documents are stored into memory, two 3-digit numbers will appear.
The first 3-digit number represents the number of pages successfully
transmitted. The second 3-digit number represents the total number of pages
that were attempted to be transmitted. Asterisk "*" indicates that the quality of
some received copies was poor.
: 001 to 255 (If the communication is stored into memory, a file number is
assigned for each communication.)
: "XMT" means Transmission.
"RCV" means Reception.
"POL" indicates Polling.
"FWD" means Fax Forward.
: Name : Recorded name in One-Touch or ABBR. Numbers or remote station's
Character ID.
number : Dialed telephone number (PIN code will not be shown)
Number : Remote station's ID number.
Email address
: For service personnel only
: Up to 25 characters
: Up to 20 digits
: Up to 16 characters
Journals and Lists
7
149