Advertisement
Components
Fan
1
TY-UPK42HV7 (For TH-42PHD7)
Fan mounting screw (M3)
Fixing screw (M5)
Points to note during installation
This optional fan kit is designed exclusively for vertical use with this display model.
In order to ensure correct, problem-free operation of the Plasma Display, do not
install the Display in any of the following places.
• Places which are next to sprinklers or sensors
• Places which are subject to vibration or shocks
• Places which are close to high-voltage wires or electric motors
• Places in direct contact with air from heaters
When installing the wall-hanging bracket unit, use a mounting method appropriate
to the type of wall.
This kit does not include the bolts needed to mount the bracket to the wall. Please
purchase screws suitable for the material (wood, steel frame, concrete, etc.) of the
wall on which the bracket and Plasma Display are to be mounted.
Install so the screws and power cord do not touch metal parts of the wall.
Insert the power cord plug for the Plasma Display into a wall outlet which is close
and easily accessible.
Provide adequate ventilation so that the temperature around the display does not
rise above 35 . If there is insufficient movement of air inside the display, heat may
build up inside the display, and fire may result.
To set the display up vertically, you will also need the TY-WK42PV1 or TY-WK42PV7
vertical wall bracket.
After installing the fan kit for vertical use and before attaching the back cover, do
the following to avoid smoke, fire, or electric shock.
• Check that all wiring is as directed.
• Ensure screws and other metal objects are not inside the kit.
3
2
TY-UPK50HV7 (For TH-50PHD7)
Lead clamper
1 (Only TY-UPK42HV7)
3 3
Advertisement
